On my OBW, I find it a lot easier to remove the Headlight Housing assy(that way you get access to all the bulbs), replace the faulty bulb by a Brand X H1-12V-55W(make sure you don't touch the glass), check if it's working & re-install the housing. Bingo...
change the bulb, the high and low are contained in one unit...
how to replace high/low beam, turn signal lever on 1996 subaru outback wagon
Pull the complete headlight assembly out to get to the bulb.
change low beam lite in 1999 suburban
how to change out low beam on 2005 hyundai sonata?
How do I change the low beam bulb in a gmc sierra 2005?
You Have a bad headlight, it's common when a headlight burns out for only the high beam to work, solution change your headlight.
Because there are two light bulbs and the low beam bulb is burned out
how do you change the low beam head lamp on a 2006 grand prix?
The Low Beam AND High Beam are in the same bulb. The procedure to change it will be in the owners manual.
Yes, the 2003 Hyundai Accent takes a dual-beam headlight lamp for low beam and high beam. See sources and related links below for bulb information.
To change the low beam on a 2003 Lexus RX300, first, open the hood and locate the headlight assembly. Remove the cover or cap on the back of the assembly, then disconnect the electrical connector from the bulb. Twist the old bulb counterclockwise to remove it, then insert the new bulb by twisting it clockwise. Finally, reconnect the electrical connector and replace the cover.