To reset the maintenance service indicator on a 2005 Mercedes SLK 350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn off the ignition and start the engine; the maintenance light should be reset. If the light remains, repeat the process.
To erase the maintenance code on a Mercedes SLK 350, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. This should reset the maintenance indicator. If the code persists, it may require a diagnostic tool or service reset through the vehicle's onboard computer.
At Performance Mercedes Benz in St. Catharines, Ontario we paid $581.26 for a glorified oil change or Service "B" on our 2007 SLK 350 with 37,000 kms on it in September of 2012.
Sit in the car with all doors closed and have the instrument cluster showing the miles. turn the key to position 1 and hit the 'R' button on the left side of the i.c. 3 times fast! this will enter the service menu, from there you can confirm the service has been performed
Sit in the car with all doors closed and have the instrument cluster showing the miles. turn the key to position 1 and hit the 'R' button on the left side of the i.c. 3 times fast! this will enter the service menu, from there you can confirm the service has been performed
To reset the SRS warning light on your SLK 350, you can use an OBD-II scanner that has the capability to clear airbag codes. If you have access to one, plug it into the OBD-II port and follow the instructions to erase the SRS codes. Alternatively, you can disconnect the car battery for about 15 minutes to reset the system, but this may not always work. If you're uncomfortable doing it yourself, you might want to consider the $181 service from Mercedes for a guaranteed reset.
To reset the service maintenance indicator on a 2006 Mercedes-Benz SLK 200, turn the ignition key to position "2" (without starting the engine). Press the gas pedal three times within ten seconds. Then, turn the ignition off and start the engine to verify that the maintenance indicator has been reset.
To reset the service indicator message on a 2006 Mercedes Benz SLK 280 after completing Service A or B, insert the key into the ignition and turn it to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds, then turn the ignition off. When you start the engine again, the service indicator should be reset. If the message persists, repeat the process.
Hi Did you ever get a resolve on this???? I seem to have the same problem SLK 350... Please reply to everard.w@ntlworld.com cheers
On a 2005 SLK 350, the engine number is typically located on the engine block itself. You can find it on the left side, near the front of the engine, often stamped onto a flat surface or a metal plate. It may also be accessible from underneath the vehicle. It's advisable to clean the area around the number for better visibility.
The audio input jack on the 2005 SLK 350 Mercedes is typically located in the center console, near the gear shift. It may also be found inside the glove compartment or on the front of the radio unit, depending on the specific audio system installed. If you have trouble locating it, consulting the owner's manual can provide detailed guidance.
clear maint code from 2001 slk 320