using a code reader
A person can reset the check engine light by using an OBD scanner to clear the codes. This is after the problem is fixed.
you don't
did u try to check your oil level? if so...try to reset it, using the manual.....ignite the car with engine off...bury the throttle it shld reset did u try to check your oil level? if so...try to reset it, using the manual.....ignite the car with engine off...bury the throttle it shld reset
oil servis reset without using a computer http://www.kofla.net/chevrolet.htm
There are a couple of ways to reset the Service Engine Soon light on a Suzuki Grand Vitara. The easiest way is to get a scan tool from your local auto parts store. Using the scan tool will reset the service engine light. Disconnecting your vehicle's battery is another way that often works to reset the Service Engine Soon light.
A glider which is alight aircraft designed to fly for long periods without using an engine.
To reset the engine light in a 2003 Dodge Caravan, you can disconnect the negative battery cable for about 10-15 minutes. This will clear the engine codes and reset the light. Alternatively, using an OBD-II scanner to clear the trouble codes can also reset the engine light. However, ensure that any underlying issues causing the light to illuminate are resolved before resetting it.
To reset "Maintenance Notice" on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule' key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.
To reset "Maintenance Notice" on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule' key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.
To reset a Renault Espace from limp home mode, start by turning off the engine and waiting for a few minutes. Then, turn the ignition back on without starting the engine, allowing the vehicle's systems to reset. If the issue persists, check for any fault codes using an OBD-II scanner and address any underlying problems. Finally, restarting the engine may clear the limp home mode if the issue has been resolved.
To reset "Maintenance Notice" on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule' key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.