You have a bleed screew in the top hose from the radiator undo it slightly to let the air out.Once bleed retighten the screw.
To fix an air lock in the heating system of a Peugeot 405, start by ensuring the engine is cool. Open the radiator cap and run the engine to allow air bubbles to escape. You can also slightly loosen the bleed valve on the heater matrix or radiator to let trapped air out, tightening it once water flows steadily. Finally, check the coolant level and top it off if necessary, then run the engine again and monitor for any recurring air locks.
Self bleading ,turn stearring fom lock to lock with engine runing
Make sure the heater switch is turned fully on, before draining the system and also when refilling the system.
it means that your anti lock brake system needs to be check
Fuse 15
Yes, you can accidentally lock your keys inside a Peugeot 206 if you exit the car with the keys still inside and the doors are locked automatically or manually. It's important to be cautious when exiting the vehicle to ensure you have your keys with you.
This goes on to inform you of a problem with the anti-lock braking system. It is controlled by a computer called the electronic control unit.
To change the door lock on a Peugeot 306, first, remove the door panel by unscrewing any screws and gently prying it off. Disconnect the electrical connectors and the rod that connects the lock to the door handle. Next, unbolt the lock assembly from the door and replace it with the new lock. Reassemble the door by reversing the steps, ensuring everything is securely fastened.
To change the boot lock on a Peugeot 106, first, remove the interior panel of the boot to access the lock mechanism. Disconnect the wiring harness and unscrew the old lock from its housing. Install the new lock by reversing the process: secure it in place, reconnect the wiring, and reattach the interior panel. Ensure everything is functioning properly before closing the boot.
To turn off the child safety lock on a Peugeot 206, open the rear door and locate the child safety lock mechanism on the edge of the door. Use your key or a flathead screwdriver to turn the lock mechanism from the "lock" position to the "unlock" position. This will allow the rear doors to be opened from the inside. Repeat the process on the other rear door if necessary.
To turn on the peugot 308 child safety lock, you must go to the setting section. Then scroll to the security section which has a child lock option you can use.
To remove an air lock from a diesel Peugeot, first ensure that the fuel system is primed. You can do this by turning the ignition on (without starting the engine) for a few seconds to activate the fuel pump, repeating this several times. If the air lock persists, locate the bleed screw on the fuel filter or injection pump, loosen it slightly, and manually pump the primer bulb until fuel flows out without air bubbles. Finally, tighten the bleed screw and attempt to start the engine.