If you have an engine oil leak on your 2002 Peugeot 206 1.4, you can use an oil stop-leak product to fix it.
depends on the prob but most likely with 206 replace the central locking motors
The secret to fixing the central locking in a Peugeot 206 is by checking the keys. Check the keys to see if the infrared responders are functioning. These can only be programed using diagnostic equipment available on Peugeot repair shops.
i don't know..sorry! :)
you can cut wire of battery for 2 hours. then you fix it and enter your correct code.
To fix a boot lock issue on a Skoda, first, ensure the key fob battery is charged and functioning properly. If the remote locking feature is not working, check the fuse related to the central locking system. If the boot lock is physically jammed, try lubricating the lock mechanism with penetrating oil. If these steps don't resolve the issue, consider consulting a professional mechanic for further diagnosis and repair.
To fix the boot lock on a 2008 Opel Astra three-door, start by checking the fuse related to the locking mechanism and replacing it if necessary. If the fuse is fine, remove the interior trim panel of the boot to access the lock assembly and inspect for any mechanical issues or disconnections. Lubricate the lock mechanism with appropriate grease and, if needed, replace the lock assembly if it's damaged. Reassemble the trim panel and test the lock to ensure it operates correctly.
Best thing to do is to get a new car. I'd recommend a Toyota Yaris 2.6l dualspark converter system
To fix or replace faulty Peugeot 206 headlights, clasp and pull the wiring away from the socket. Use a wrench to remove the black nut found near the wiring.
To fix a rev counter in a Peugeot 206, first check the fuse related to the instrument cluster to ensure it's not blown. If the fuse is intact, inspect the wiring and connections behind the instrument cluster for loose or damaged wires. Additionally, consider testing the engine speed sensor, as a faulty sensor can prevent the rev counter from functioning properly. If these steps do not resolve the issue, it may be necessary to replace the instrument cluster.
Also you might want to open the boot, there is a small pipe going to both of the noxxles check it if its blocked or some thing. Also a quick fix would be to take a small pin or needle and put it in the wholes of your nozzle as it will unblock /lock the air lock and it should start working. Infact try the needle trick first before opening the hood. Check the pickup screen. If it becomes clogged you will not be able to get washer fluid through it.
how to fix or check po 206