Answer : to reset the display do the following :
with the ignition switched off, press and hold the trip meter reset button below the speedometer.
Switch the ignition on and hold the reset buttton for at least 10 seconds. Dashes appear in the display. The service has been reset.
To reset the service reminder on a 2006 VW Golf MK6, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn the ignition off and start the engine to verify that the service reminder has been reset. If the reminder still appears, repeat the steps.
To reset the service reminder for a 2006 Royal Caprice, turn the ignition key to the "On" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. When you start the vehicle again, the service reminder should be reset. If this method doesn’t work, consult the owner’s manual for specific instructions.
To reset the service reminder on a 2006 VW Polo 1.6, first turn on the ignition without starting the engine. Press the trip reset button on the dashboard until the mileage display shows "Service." Then, hold the button down for about 10 seconds until the service indicator resets. Finally, turn off the ignition to complete the process.
the service light will go off after a number of miles..... I believe mine went off after 100 or 200 miles
How do you reset maintenance service indicator on a 2006 Mercedes E350
How do I reset the Service A/B on a CLK 350
you need to take it to the dealer and have the computer flashed. this will clear the code and the light.
When the car is off, hold the reset button on the right side of the dash (0.0). Then turn the key on (not the engine) and once the service now words come out on the display press the minute(m) button on the right. That should turn the service now off.
You'll need to use a scan tool or other OBDII software to reset your service lights.
Press the step button until 0 miles to service is displayed. Press and hold reset.
Call Infinity service
To reset the service light on a 2006 Mercedes ML350, first turn the ignition to the "on" position without starting the engine. Then, press the gas pedal three times within five seconds. After that, turn the ignition off and back on. The service light should now be reset.