0
What else can I help you with?
What is the recommended Octane fuel for a Petrol 1600 Renault Megane II 2005?
95
Renault megane II check gearbox?
Common problem have Solenoid replaced Usually the pressure regulator valve.
Where is the diagnostic port for a Renault megane?
On my 2004 Megane (II) it is located underneath the cigarette lighter port. Pull off plastic cover of this "coin-tray compartment" and you will expose the diagnostic port.
What obd protocol does Renault megane 1.6 petrol 2001 use?
The 2001 Renault Megane 1.6 petrol typically uses the OBD-II protocol, which became standard in vehicles manufactured after 1996. However, some earlier models may also support the older OBD-I protocol. To communicate effectively with the vehicle's onboard diagnostics, it's essential to use an appropriate OBD-II scanner that is compatible with Renault vehicles.
I have changed the battarie on a Renault megane 03 dci for some reason i am now geeting a steering fault coming up on the computer and the power steering is not working?
Hi I am having exactly the same problem - except that I have not changed the battery recently. This is a very common fault in Renault megane II of this age as is inherent problems with the turbo giving out. if you google Renault megane steering fault you will find many people with the same problems - also visit www.meganeownersclub.co.uk for some more support
How do you replace the headlights on a Renault Clio II Mk2?
Not easily, One bolt at the top of the head light and but the other two at located behind the bumper, so that's got to come off.
How do you fix A injector fault on Renault megane?
To fix an injector fault on a Renault Megane, first, diagnose the issue using an OBD-II scanner to check for error codes related to the fuel injectors. Inspect the wiring and connectors for damage or corrosion, and ensure that the injector is receiving the correct voltage. If the injector is faulty, replace it with a new one and clear the error codes. Finally, run the engine to verify that the fault has been resolved and the vehicle is running smoothly.
How do you remove the whole dashboard from a megane ii?
To remove the whole dashboard from a Renault Megane II, start by disconnecting the battery for safety. Then, remove any trim pieces and screws holding the dashboard in place, including those around the instrument cluster and center console. Carefully detach any electrical connections, such as airbag and control module connectors. Finally, pull the dashboard away from the mounting points, ensuring no clips or fasteners are left attached.
How do you reset warning lights after replacing clockspring on 05 Renault megane?
To reset the warning lights after replacing the clockspring on a 2005 Renault Megane, you can use an OBD-II scanner to clear any error codes related to the airbag or steering system. Alternatively, disconnect the car battery for about 10-15 minutes, then reconnect it, which may also reset the warning lights. If the lights persist, check for any additional issues or ensure that all connections related to the clockspring are secure. Always consult the vehicle's manual for specific instructions.
My Renault megane scenic 2003 model has no spark and won't start how do i fix it?
To diagnose and fix the no-spark issue in your 2003 Renault Megane Scenic, start by checking the ignition system components, including the spark plugs, ignition coils, and the ignition module. Inspect the wiring for any damage or corrosion. Additionally, check the crankshaft position sensor, as a faulty sensor can prevent spark generation. If these components are functioning properly, consider using an OBD-II scanner to identify any trouble codes that may indicate further issues.
Does the Renault scenic 1.8 dci have a can-bus wiring system?
All Renault scenic II models shipped with CANBUS wiring.
Do Renault Espace II seats fit in an Espace III?
nope
