answersLogoWhite

0

What else can I help you with?

Related Questions

Where is the neutral safety switch in 1997 land rover discovery?

In a 1997 Land Rover Discovery, the neutral safety switch is typically located on the transmission. It is usually mounted on the side of the transmission casing and is connected to the gear selector mechanism. This switch ensures that the vehicle can only be started when the transmission is in the "Park" or "Neutral" positions. For specific access and replacement instructions, consulting a repair manual or a professional mechanic is recommended.


How do you replace a heater thermos switch of a land rover discovery 1996?

I want to know where the thermo switch of land rover discovery 1996 located in the car.


How do you change spark plugs on 2002 Land Rover discovery?

how do you change spark plugs and wires on 2002 land rover discovery


2003 Land Rover Discovery Can't take it out park?

I am not sure on the later Discovery's but on my '95 Series 1, the culprit is the brake light switch. Easy to change - when it goes it does not allow the vehicle to move from park. Call any of the Rover parts catalogs and they can walk you through it.


How you change the water pump on a Land Rover discovery?

How do you remove a water pump on a 2002 land rover


Why is your range rover stuck in neutral?

its the brake switch censer under the brake peddle itself.


Can Land Rover discovery front fog lights do not work?

lsndrover discovery 2007 front fogs not working and switch not showing on on dash


My 2004 land rover Discovery is stuck in neutral?

Check to see if Brake lamps work when brake pedal is pressed. If not gear shifter is locked for safety so replace fuse or repair brake lamp switch.


When was Land Rover Discovery created?

Land Rover Discovery was created in 1989.


Where is the brake switch located in a land rover discovery?

Look at the uper end of the brake pedal under the dash area


Is the Land Rover discovery supposed to be noisy?

Why is Land Rover Discovery so noisy


How do you change out starter switch 1999 discovery II?

To change the starter switch on a 1999 Land Rover Discovery II, first disconnect the battery to ensure safety. Remove the steering column cover by unscrewing the screws and gently prying it apart. Locate the starter switch, which is typically mounted on the ignition lock assembly, and disconnect the wiring harness. Replace the old switch with the new one, reconnect the wiring, and reassemble the steering column cover before reconnecting the battery.