how can i change bulb
it is impossible
You first have to purchase the correct light bulb for your Peugeot 207. The next step is to remove the bolt that is holding the light bulb cover in place. Then, remove the light bulb cover. finally, replace the bulb.
Find the dashboard.
Change the bulb??
The Peugeot 206 is a subcompact car. One has to remove the full light to change indicator bulb. A spanner can be used to remove the light cluster. Break the spanner off, and rebuild.
I have an estate, so the procedure might be slightly different on a hatchback, but not by much. The rear light cluster is attached via a screw behind the facia panel at the back. You will need to remove the plastic panel in the boot behind the light cluster and unscrew the unit before you can remove it to change the bulb.
Unscrew both screws on trim around light Then unscrew the light Remove bulb Change and then screw back in
You need to go inside the boot, and peel back the carpet directly behind where the light would be and you should see two nuts. #they're either size 8 or 10. cant quite remember.
fitting rear bulb peugeot expert van
The wiring harness goes into a boot on the back of the headlight assembly. Twist the boot until the three-pronged tabs are aligned with the slots and pull the boot/bulb out of the headlight assembly. Pull the bulb out of the boot. Do not handle the new bulb with your fingers. Assembly is the reverse of the removal.
the box containing all the bulbs is in the boot,one at each side,pull out old bulb and replace.