Hi, first you don't say which bushes you need to change/ replace?The two large location bushes at the back of the top side of the front subframe
on all models of Megane
from 2003 onwards are notorious
for failing with age. These bushes are not available from Renault without purchasing the full subframe,
however a company called Commonsense Car Parts in Dundalk,
Co Louth,
Ireland do supply them.
The steering rack needs to be disconnected first, thenthe two large bolts that travel upwards through these bushes must be undone, as well as the two bolts to the front of the subframe.
This will allow the subframe
to drop allowing access to the two bushes. Simply tap them out from the bottom and tap the new ones in.
how to change Renault megane timing belt
To remove the front subframe on a Renault Megane, begin by safely lifting the vehicle and securing it on jack stands. Disconnect the battery, then remove any components obstructing access, such as the engine mounts, anti-roll bar, and suspension components. Unbolt the subframe from the chassis, ensuring to support it adequately as you remove the last bolts. Finally, carefully lower the subframe away from the vehicle.
Take it to a mechanic.
take it to a proper garage
Will a Renault Megane V Plate ignition barrel fit a Renault Megane Cabriolet R PLate?
Yes there is a coolant sensor in the Renault megane.
4 parking sensors on the back
I own a diesel (1.9dti) Renault megane 2000 edition. I change the brake pads(front) every 15000 Miles approximately.
Read the handbook
At a garage, no way is this a home job
With a lighter and petrol
clutch cable replace