a couple of the screws ADJUST the direction of the light... see if your local library has a book to look at, and if your going to keep it, consider investing in a manual also the parts store people may walk you through it... d
To change the low beam headlight on a 2001 Lexus IS300, first, open the hood and locate the headlight assembly. Disconnect the power connector from the back of the headlight bulb and remove the rubber cover. Twist the bulb socket counterclockwise to release it, then pull out the old bulb and insert the new one, making sure not to touch the glass. Finally, reassemble everything by reversing the steps and test the headlight.
You Have a bad headlight, it's common when a headlight burns out for only the high beam to work, solution change your headlight.
Carry it to dealer who will replace on low beam headlight for $15 +/- dollars in about 5 minutes.
Begin by removing the wiring harness from the back of your 1989 Silverado headlight assembly. Remove the low beam headlight assembly retaining bolts. Reverse the process to install your new low beam headlight.
please answer the question
with ur hands
You can access the low beam headlight bulb from the engine compartment. Push the bulb holder in and turn. The bulb will come out.
To change the high beam headlight on a 2008 Honda Goldwing you first have to remove the headlight housing by taking the six bolts off. After you remove the cover it is as simple as disconnecting the wiring and then pulling the light out.
The Low Beam AND High Beam are in the same bulb. The procedure to change it will be in the owners manual.
headlight bulbs changed,dimmer swich changed,headlight swich changed.key off headlight work low ,key on goes to brights. unpluged harness check ok at first ,but after a few try hi beam indictor would not go to low m-beam
replace passenger side low beam headlight
don't they have differnet energy requirements and you can end up with dead batteries or worse 177