To change the plastic oiler tube lifters on a 1997 SL500 Mercedes, you must first remove the intake manifold to access the lifters. Once exposed, you can carefully remove the old plastic tubes and replace them with new ones, ensuring they are properly seated. Yes, metal replacements for the plastic oiler tubes are available and are often recommended for improved durability and longevity. Always consult a service manual or a professional mechanic for detailed instructions and to ensure proper installation.
If we are talking about valve lifters, remove cylinder head and pushrods and lifters will be excessable.
look in the owners manual very helpful book. or remove plastic cover and twist plastic cover where build is
You can just change the bulb. Pop off the wiring harness, then it's a twist lock plastic piece and the bulb comes out. Replacements are about $6 at WalMart
behind rear wheel passenger side. take out plastic cover.
about front of rear right wheel. take out plastic cover.
It's not recommended to change just the lifters. The cam and lifters should be replaced together. To get at the lifters, you can remove the rocker covers and intake manifold, loosen the rockers enough to get the pushrods out, then pull out the lifters.
You don't, leave it to the professionals.
from inside the trunk pop all of the plastic rivots and you can access the bulbs from the inside..
how to change headlight on 1999 Mercedes e350
How do you change the headlight on a 240D mercedes?
You have to remove the cylinder head(s) to access the lifters.You have to remove the cylinder head(s) to access the lifters.
take the valve cover off should be 4 head bolts then pull the valve cover off and youll see four plastic plugs in between the dual overhead cams below the plastic things are the spark plugs