if is xsara picasso then: from inside move carpet on the left side, there you see two metal parts which need to be squeeze and all rear light come off. Then you take off plastic where are all bulbs in, brake, direction and reverse bulb
how do you change a brake light bulb from a citroen c4 tail light unit. thanks
Citroen xsara Picasso dashboard light bulb is the bulb that's for the dashboard light climate control. The you tube web site gives you information as how to change the bulb.
There is a switch behind the brake pedal. Fairly easy to replace, or a 10 minute job at a garage.
The brake light bald can be accessed through the trunk of the car. Remove the rear tail light cover to access the brake light bulb.
To change the brake light on a Citroën C4 Picasso, first, open the rear hatch and remove the plastic cover or panel that protects the tail light assembly. Next, twist the bulb holder counterclockwise to release it from the assembly and pull it out gently. Replace the old bulb with a new one, ensuring it is securely fitted, then reinsert the bulb holder into the assembly and twist it clockwise to lock it in place. Finally, replace the cover or panel and test the brake light to ensure it works.
NO
Remove the fuse board cover at the right hand side of the steering wheel, the switch is located behind the mass of cables, a quarter turn to the left will allow the switch to be removed.
undo the 2 plastic screws at the back of the light the whole light unit comes off then.
It's under the n/s front light.
To fit a high-level brake light on a Citroën Picasso, first, ensure the vehicle is turned off and the keys are removed. Access the rear hatch by opening it, then locate the mounting area for the light. Remove any cover or screws if necessary, connect the wiring harness to the new brake light, and securely attach the light to the mounting area. Finally, test the light to ensure it functions correctly before closing the hatch.
Take the gearbox out and flip it round twice
The alternator needs attention or replace