There is a switch behind the brake pedal. Fairly easy to replace, or a 10 minute job at a garage.
in the fuse box
One may want to enlist the help of a professional to change the front brake disc on a Citroen Xsara Picasso. It can be a tough job and dangerous if not done correctly.
Remove the fuse board cover at the right hand side of the steering wheel, the switch is located behind the mass of cables, a quarter turn to the left will allow the switch to be removed.
No braking lights is usually caused by the failure of the switch behind the brake pedal. It's a fairly easy job to replace, but check it isn't a simple fuse failure first
Hi If your car is diesel , change the airflow meter or the brake switch thanks
how do i change rear brake pads on 53 plate Picasso hdi
if is xsara picasso then: from inside move carpet on the left side, there you see two metal parts which need to be squeeze and all rear light come off. Then you take off plastic where are all bulbs in, brake, direction and reverse bulb
If the side and brake lights on a Citroën Xsara Picasso remain illuminated without the lights being turned on, it could be due to a faulty switch, such as a stuck brake light switch or a malfunctioning lighting control module. Additionally, a wiring issue or a short circuit could lead to unintended activation of the lights. It's advisable to inspect these components to diagnose and resolve the problem.
If the brake lights on your 1998 Citroen Xsara were working and now they are not, but the bulbs are fine, the issue may be with the brake light switch. The brake light switch is a small electrical component located near the brake pedal that activates the brake lights when the pedal is pressed. It is common for these switches to fail over time, resulting in non-functional brake lights. I recommend checking the brake light switch and replacing it if necessary to restore proper brake light functionality.
fuse box layout of xara Picasso- no brake lights. which fuse would it be ?
To change the brake light switch on a Citroën Xsara, first disconnect the negative battery terminal for safety. Then, locate the brake light switch, which is typically found near the brake pedal assembly. Remove the electrical connector from the switch, then unscrew and take out the old switch. Install the new switch by reversing the process and reconnecting the electrical connector before reattaching the battery.
The squeaking noise when turning your Citroën Xsara Picasso could be caused by worn or damaged components in the suspension system, such as bushings or ball joints. It may also originate from the power steering system, such as low fluid levels or a failing pump. Additionally, check for any debris caught in the wheel wells or issues with the brake components. A thorough inspection by a mechanic would help identify the exact cause.