Trouble code P2104 means: Throttle actuator control (TAC) system-forced idle mode Trouble code P2112 means: Throttle actuator control (TAC) system actuator stuck closed
Trouble code P2104 means: Throttle actuator control (TAC) system-forced idle mode
P2175 Throttle Actuator Ctrl Sys-Low Airflow DetectedThere is a malfunction with the electronic throttle system.P2175 Throttle Actuator Ctrl Sys-Low Airflow DetectedThere is a malfunction with the electronic throttle system.
Trouble code P2106 means: Throttle actuator control (TAC) system-forced limited power mode
Trouble code P2111 means: Throttle Actuator Control System - Stuck Open
Trouble code P2104 means: Throttle actuator control (TAC) system-forced idle mode
No, the throttle body and throttle actuator are not the same, although they work together in the vehicle's engine management system. The throttle body is the component that controls the airflow into the engine, while the throttle actuator is the mechanism that adjusts the throttle plate position based on signals from the engine control unit (ECU). In the Jaguar S-Type, these components collaborate to regulate engine performance and responsiveness.
P2112- Throttle actuator control system stuck closed. The throttle on your vehicle is not controlled by a cable but by a actuator motor in conjunction with a sensor inside the accelerator pedal. This fault indicates there is a problem with the throttle side of the system. The throttle is either binding, slow to respond, completely stuck or has failed. Other possible causes include problems in the wiring (open/short circuit) faulty connection(s), or battery voltage problems could also cause this. I would try checking the connections to the throttle actuator, and if you are up to it carefully clean the throttle to see if you can save it. Good luck!
Trouble code P2110 means: Throttle Actuator Control System - Forced Limited RPM
Trouble code P2104 means: Throttle actuator control (TAC) system-forced idle mode
Trouble code P2106 means: Throttle actuator control (TAC) system-forced limited power mode
Trouble code P2104 means: Throttle actuator control (TAC) system-forced idle mode