0
If you want to make it better take it to a good garage
it's better
clean out the throttle body with a throttle body cleaner. Use a tooth brush to clean.
wd-40 the linkage where the cable goes into the line (by the accelator petal) may be rusting up there..
If your car is equipped with a throttle body, try taking some carburetor cleaner and a lint free rag and cleaning around the rim of where the butterfly valve closes. to do this you will have to remove the cover to acesss the throttle body be sure not to drop anything into the throttle body when the butterfly valve is open!
This is one question I would not ask a Toyota dealer!
What else can I help you with?
How do you fix a 92 Thunderbird that starts and runs weakly then dies when the gas pedal is depressed?
By A Chevy
How do you fix the brake lights on a 2000 Ford Contour that stay on while the car is off?
check the brake pedal, there is a switch on the back of the pedal that depressed when the brake is depressed that turns the lights on, when this is loose it keeps the lights on.
How can I fix a stripped bike pedal?
To fix a stripped bike pedal, you can try using a pedal tap to re-thread the crank arm. If that doesn't work, you may need to replace the crank arm or the pedal.
Why is my bike pedal creaking and how can I fix it?
Your bike pedal may be creaking due to a lack of lubrication or loose components. To fix it, try applying lubricant to the pedal threads and tightening the pedal securely. If the creaking persists, consider having a professional inspect and potentially replace the pedal.
How do I fix TPS pedal position sensor A circuit low input?
How do i fix the TPS pedal position sensor in a grand prix pontiac 2004.
How can I fix bike pedals that are spinning freely?
To fix bike pedals that are spinning freely, you can try tightening the pedal axle with a pedal wrench or replacing the bearings inside the pedal. If these steps don't work, you may need to replace the entire pedal assembly.
Why is my bike pedal stuck and how can I fix it?
Your bike pedal may be stuck due to a variety of reasons such as dirt, rust, or a loose crank arm. To fix it, try cleaning and lubricating the pedal threads, tightening the pedal securely, or seeking professional help if needed.
What have you done if you kicked something near the clutch pedal and now the engine will not turn over and how do you fix it?
The clutch has a safety switch that prevents the engine from starting unless the clutch is depressed. If you kicked the switch or a wire loose, this would caause a no start. Look for loose wires or componants near the clutch pedal and reattach as needed.
How can I fix a loose bike pedal?
To fix a loose bike pedal, you can use a pedal wrench to tighten the pedal securely onto the crank arm. Make sure to turn the pedal in the direction that tightens it, which is usually clockwise on the right side and counterclockwise on the left side. Check the pedal regularly to ensure it remains tight during rides.
How can I fix a bike pedal that is loose or not working properly?
To fix a loose or malfunctioning bike pedal, first, check if it is securely screwed onto the crank arm. If it is loose, tighten it using a pedal wrench. If the pedal still doesn't work properly, it may need to be replaced.
Why is my bike pedal squeaking and how can I fix it?
Your bike pedal may be squeaking due to a lack of lubrication or dirt buildup. To fix it, try applying lubricant to the pedal threads and bearings. If the squeaking persists, you may need to disassemble the pedal and clean or replace any worn parts.
How do you fix a sicky and not returning clutch pedal on a 1993 Nissan sentra?
same thing started happening on my '97, you will probably need to have a new clutch cable installed. when they get old, sometimes they will start to fray which causes them to stretch and causes your pedal to become sticky.
