0
Open your boot up and you'll notice that there is one screw at the top of the light cluster you want to access. Remove this.
Then go to the side. The little sideways V indicator lens at the front of the light assembly is separate from the rest of the lens. Insert a thin flat head screw driver under the long straight side of this little indicator lens, lever it outwards and upwards and towards the front of the car, it will pop out, (fitting is the reverse)
Undo the two screws that will now be visible and gently pull the cluster away from the side outwards a little and rearwards, it will pop off, its held in by brackets and metal bars.
When it's out you undo the necessary bulb anti clockwise and then the bulb itself can be removed and replaced.
Fitting is the reverse of the operation
What else can I help you with?
How can you replace the middle window brake light on a 2001 Toyota Camry?
You normally gain access to the bulb from inside the trunk.
How do you replace a drivers side parking light on a 1993 park ave?
Remove the headlight assembly to gain access to the parking light socket/bulb.
How do you replace a headlight bulb on a 2008 Malibu?
Remove tire & inner liner to gain access to head light assembly
How do you replace the third bake light of Toyota Highlander 2005?
I replaced mine on my '01 HL...it is done from inside. Open the hatch and pop the moulded plastic from the inside of the rear hatch to gain access to the bulb. I first attempted to change it from the outside..WRONG busted the light and had to buy new for $100....
How do you repair the side light in the back on a Lexus RX 300?
The rear outer portion of the wheel well liner needs to be displaced to gain access to the light socket and bulb.
How do you replace the sidelight bulb on a Jaguar X-Type?
i have a jag x type and my sidelight bulb has blown....in looking space is limited...but has the light array a cover over it and does this unscrew..or just pull off to gain access to the bulb
I own a 1998 Cadillac De Ville Concourse and am trying to replace the bulb on the passenger side front marker light What is the quickest way to gain access to the bulb?
remove headlight frame you can see it then
How do you change the headlight bulb for a 2003 Nissan 350z?
Jack up the front remove tire pull back (unclip) plastic wheel well cover to gain access to head light bulb.
How do you replace a rear marker light on a 2003 Lexus RX-300?
To replace the rear marker light on a 2003 Lexus RX-300, first, open the rear hatch and locate the access panel on the inside of the tail light assembly. Remove the panel or any screws holding the tail light in place to gain access to the bulb socket. Twist the bulb socket counterclockwise to release it, then pull out the old bulb and replace it with a new one. Finally, reassemble the tail light assembly and secure the access panel.
How do you replace the fog light in a 2000 Oldsmobile Alero?
Underneath the housin itslef is a black piece of plastic with 3 or 4 screw holding it on. You need to remove this to gain access to the bulb. Once you gain access, simply turn the brown colored base of the bulb counter-clockwise and unplug the wire harness. Insert the new bulb without touching the glass part of the bulb and turn clockwise until the bulb locks into place and replug the wire harness and reinstall the black plastic.
How do you replace a fog light bulb on a 2007 saab 9-3?
To replace the fog light bulb on a 2007 Saab 9-3, first, ensure the vehicle is turned off and the keys are removed. Access the fog light assembly by turning the steering wheel to the left or right to gain better access, then locate the fog light housing. Twist the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reinsert the socket by turning it clockwise. Finally, test the fog light to ensure it’s functioning properly.
How do you replace the light bulb on a 2002 Buick century?
By removing the locks that hold the headlight assembly in place you can wiggle the headlight assembly out to gain access to the headlight bulbs for replacement.
