To turn off the service light on a Renault Clio, first ensure that the vehicle is in the "ON" position without starting the engine. Then, press the trip reset button on the dashboard until you see the service interval display. Finally, hold the button for about 10 seconds until the service light resets. If the light remains on, consult the owner's manual for specific model instructions.
On a Renault Clio washed car but Rear indicator lights still on and can't turn them off?
Get it serviced
To reset the service light on a 2006 Renault Clio, turn on the ignition without starting the engine. Press the accelerator pedal three times within 10 seconds. After doing this, turn off the ignition and then start the engine; the service light should be reset. If the light remains on, you may need to repeat the process.
To reset the service light on a 2003 Renault Clio, first turn the ignition key to the "ON" position without starting the engine. Press the accelerator pedal three times within 5 seconds. After doing this, turn the ignition off and then start the engine to ensure the service light has been reset. If the light remains on, repeat the process.
Try disconnecting the battery for about 10 minutes - sometimes it works
It's the immobiliser it's on all clio's
To turn off the service light on a 2001 Renault Clio, you typically need to reset the service indicator after performing maintenance. First, turn the ignition key to the "On" position without starting the engine. Then, press and hold the trip reset button on the dashboard while turning the ignition back to the "Off" position. Release the button, then turn the ignition back to "On," and the service light should be reset. If it remains on, consult the vehicle's manual for specific instructions or check for any unresolved issues that may require attention.
To switch off the spanner light on a 2007 Renault Clio, you typically need to reset the service indicator after performing any required maintenance. This can be done by turning the ignition to the "ON" position without starting the engine, then pressing the accelerator pedal three times within 10 seconds. After this, the spanner light should turn off. If the light remains on, it may indicate an ongoing issue that needs to be addressed.
To switch off the service indicator on a 2008 Renault Clio, turn the ignition key to the "On" position without starting the engine. Press the trip reset button on the dashboard until the service indicator begins to flash. Once it starts flashing, release the button, and then press it again until the indicator turns off. This should reset the service light.
To reset the service indicator on a 2006 Renault Clio, turn on the ignition without starting the engine. Press and hold the trip reset button on the instrument panel until the service indicator resets, which usually takes about 10 seconds. Release the button, and the service light should turn off. If it does not reset, repeat the process to ensure it's done correctly.
where is the feul reset on a renault clio 1.2 8v
To reset the airbag light on a Renault Clio, first ensure that the ignition is turned off. Then, disconnect the car battery and wait for about 10-15 minutes to allow the system to reset. Reconnect the battery, turn on the ignition, and check if the airbag light is off. If the light persists, it may indicate a deeper issue that requires a diagnostic scan.