0
need special tool..can get it on ebay..works well
All BMW's require a special tool to reset the Oil & Service (Inspection) indicators. The best one out there is the Peake R5 from www.peakeresearch.com. They are a bit pricey, but if your a do-it-your-selfer like me, it's a worthwhile investment!
Some may tell you that it can be done by pressing and holding buttons while turning the key to position 1, but it won't work!
What else can I help you with?
How do you reset the service engine light on a Q45 1998?
Disconnect your battery, and leave it disconnected for at least 24 hours. The battery backup on the computer will die after 24 hours, at that point, the service engine indicator is reset.
How do you reset the oil service light manually on a 1998 BMW Z3?
Ground out the # 7 pin in the data connector for 5 seconds. With the key in the acc position. Ground it out for 10 seconds to reset service light. BE SURE ITS THE RIGHT PIN. there numbered. EchoSai
How is the service reminder indicator reset on a Volvo S40 model year 1998?
Turn Key to position 1, hold in trip odometer reset while turning key to position 2. Hold down until service reminder starts flashing, then release odometer reset.
How do you reset oil indicator light on BMW 540i 1998?
Burn the car....
Why is the service engine soon light on 1998 Buick regal still on after oil was changed and had the transmission flushed and fluid exchange completed?
Must be reset manually. Look in your owner's manual for instructions.
How do you reset the service light on a c200 Mercedes?
To reset the service indicator on 1998 Mercedes Benz C200 . Turn the ignition key to position 2 and press the 0 on the left of the cluster twice. Then turn the key to position 0 Then press and hold the 0 button on the left of the cluster whilst turning the key to position 2. Continue holding the 0 button until you hear a signal or beep. Release the 0 button after you hear the beep. Service indicator will then reset.
How do you reset the tail lamp indicator on a 1998 Lexus LS400?
There is no reset for taillamp failure relay. If there is a fault the message will continue to be displayed www.lextechautomotivellc.com
How do you reset service engine light on a 1998 Chevy Astro?
disconnect the battery for 1 minute and it will reset.
How do you manually reset OBD codes on a 1998 Mercury Villager?
Either use a scan tool or unhook the battery for a minute.
How do you reset oil service light manually on a 1998 BMW 318 SE?
http://www.bmwe36blog.com/2007/02/24/reset-bmw-e36-oil-service-light/**new answer**There might be a small hole about the size of a pen tip on your dash near the instrument cluster. Usually if you press this with something that'll fit, it will go away.
How do you reset service warning light on 1998 vauxhall astra?
hold milage reset button in and switch on ignition.hold for about 5 seconds and it will reset.
How do you reset the service engine soon light on a 1998 Chevy S-10?
I reset the check engine light on my jeep by disconnecting it from the battery.
