If the cable to open the bonnet on a Skoda Octavia is broken, you may need to access the release mechanism directly. One way to do this is by locating the release lever or latch underneath the dashboard on the driver's side, near the footwell. You can use a tool such as a long screwdriver to carefully manipulate the latch and release the bonnet. It is important to exercise caution and precision to avoid damaging any components while attempting to open the bonnet without the cable.
If the cable to open the bonnet of a Skoda Octavia is broken, you may need to access the release mechanism directly. One method is to remove the front grille to reach the release latch behind it. Another option is to try accessing the release mechanism from underneath the vehicle, possibly by removing the splash guard. It may be necessary to consult a professional mechanic for assistance in safely accessing and opening the bonnet in this situation.
If the bonnet release cable of your Skoda Fabia is broken, you can try to open the bonnet manually. Look for the release mechanism under the dashboard near the driver's side; you might be able to pull the lever directly if it's accessible. If that doesn't work, you may need to access the latch from underneath the car or use a flat tool to push the latch while someone gently lifts the bonnet. If these methods fail, consider seeking help from a professional mechanic.
If you want to get the bonnet open when the catch has broken and the is no cable to get hold of the Renault Grand Espace; use the screwdriver to PUSH the catch from right to left.
pull the corde from near your pedals
You need a special cable VAG-COM ori VCDS. Disable it from coding in Cent. Elect. (09). You can also go to the dealer and ask to disable the function.
well u need to find the broken end of the cable that's still attached to the bonnet release then u need to pull the wire that is INSIDE the black insulation easy enough with a pair of pliers or vice grips but i suggest u fit a need a cable to save hassle in the future
It will cost you a few hunderd quid to get this sorted by renault... or get some handy person to get the bonnet open, and using a cable tie connected to the passenger side bonnet release, connect said cable tie, and let the end poke out from the bonnet. This then becomes your new bonnet release. Any eagle eyed person with the knowledge will be able to open your bonnet from the outside. So do be wary of this solution. But it only costs a few pence for a cable tie vs a few hunderd quid from reno.
If the bonnet cable on your 2009 Ford Fiesta is broken, you can try accessing the bonnet latch from underneath the car. Use a flashlight to locate the latch mechanism, which is usually near the front of the car, and carefully pull it with a long tool or a pair of pliers. Alternatively, you can remove the grille or other panels to gain access to the latch. If these methods are unsuccessful, it may be necessary to consult a mechanic for assistance.
If the bonnet release cable of your Audi A3 is broken, you can try accessing the bonnet manually by using a flat tool, such as a screwdriver, to pry open the latch from underneath the front grille. Alternatively, you can remove the front grille to gain better access to the latch mechanism. If these methods don't work, it's advisable to consult a professional mechanic for assistance.
remove the left hand headlight it just pulls out and pull the cable from there if you still got some attached ok
If the bonnet release mechanism of a Peugeot 405 is broken, you can try accessing the release cable from inside the vehicle. Remove the interior panel or kick plate near the driver's footwell to locate the cable, then pull it manually to open the bonnet. Alternatively, you could use a long, thin tool to reach the latch through the grille. If these methods fail, it may be necessary to seek professional assistance or replace the broken release mechanism.
You can do this buy removing the plastic front radiator grill. You need to remove indicator lights, then the middle screw, then with a small flat screw driver release the plastic clips just underneath the bonnet. Then put your hand behind the bonnet catch and pull the broken cable or the latch and it will open. Good luck