If the bonnet catch is broken, you can try to open the bonnet by using a flathead screwdriver to pry the catch mechanism. Insert the screwdriver into the gap near the latch and gently push or twist to release the catch. Alternatively, if accessible, you can pull the cable from inside the car if it’s still attached. If these methods fail, you may need to consult a professional mechanic for assistance.
If you want to get the bonnet open when the catch has broken and the is no cable to get hold of the Renault Grand Espace; use the screwdriver to PUSH the catch from right to left.
Release the main bonnet catch on the steering wheel column. Push the bonnet catch in the front grill once and it'll come out half way, then pull the half out catch to open the bonnet.
Volkswagen bonnet catch
The bonnet catch is in the foot well on the passenger side near the door but high up. Pull it to release the catch then put your fingers between the gap of the slightly open bonnet lid in the middle. You will find a small plate that needs to pushed up ton release the lid.
If the bonnet catch is broken on a Fiat Punto, you can try to access the bonnet by using a flat screwdriver or a similar tool to manipulate the catch mechanism. Gently insert the screwdriver into the gap between the bonnet and the grille, and try to push or pull the latch mechanism. Alternatively, you can remove the grille or access the catch from underneath the car if necessary. If these methods don't work, consider seeking professional assistance to avoid damaging the vehicle.
pull the bonnet catch in the car you plonker
pull the bonnet catch
the catch is on the undernath left of the sign when standing in front of the car. it is a plastic catch flush with the bonnet. work along from centre pushing up and you will open bonnet. catch is different to a convential car as it is flush with bonnet and made of plastic.
To open a broken Corsa bonnet catch, first, try to access the catch mechanism through the grille or underneath the car. You can use a flathead screwdriver to manipulate the latch if it's accessible. If that doesn't work, you may need to remove the grille or use a wire coat hanger to reach and pull the catch. If all else fails, consider seeking professional assistance to avoid further damage.
If the bonnet catch lever is broken, you can try to access the bonnet by using a flathead screwdriver or a similar tool to manually release the latch. Locate the latch mechanism through the grille or under the car's front end, and carefully pry it open. If this doesn’t work, you may need to remove the grille or consult a professional mechanic for assistance. Always ensure the vehicle is secure and turned off before attempting any repairs.
a long reach screw driver through the grill to release the catch,
To open the bonnet on a VW Fox, first locate the bonnet release lever inside the vehicle, typically found on the driver's side near the footwell. Pull the lever to release the initial catch. Then, go to the front of the car, slide your hand under the centre of the bonnet to find the secondary catch, and lift the bonnet while pushing the secondary catch to fully open it. Use the support rod, if equipped, to keep the bonnet open.