If the bonnet catch is broken on a Fiat Punto, you can try to access the bonnet by using a flat screwdriver or a similar tool to manipulate the catch mechanism. Gently insert the screwdriver into the gap between the bonnet and the grille, and try to push or pull the latch mechanism. Alternatively, you can remove the grille or access the catch from underneath the car if necessary. If these methods don't work, consider seeking professional assistance to avoid damaging the vehicle.
this is usually caused by the bonnet release cable getting stuck. try pushing and pulling the bonnet release lever inside the car.
about £700 not cheap!
not 100% sure but it could be under the bonnet on the right hand side
this holds the cooling fluid for the radiator
to the left under the steering wheel
Fiat Punto was created in 1993.
The Fiat Punto is manufactured by the company Fiat. Fiat is an Italian manufacturing company. The manufacturing of the Fiat Punto started in 1993 and is still currently being produced.
AnswerThe Bonnet is called the Hood in the U.S. Pull the lever inside the car, on drivers side. Then release the hood (bonnet) with the lever located in the front grille.If the level is slack - it points to a snapped bonnet release cable.To open the bonnet in this situation (on a Fiat Punto), you'll need to get under the car.I jacked up the car, placed it on a stand on the passenger side, and reached up underneath. I've videoed it - quick to do once you see it.http://bit.ly/Yh1dQ9TAG: Fiat Punto, Bonnet Cable, Snapped Bonnet Cable
fuse for power steering on fiat punto if your looking for the fuse under the bonnet big black box on the right open up the box and you will see the big blue fuse in the middle of the top row .
to the left under the steering wheel
It Is On the driver side (under bonnet) right at the back of the engine next to the brake fluid.
i have a 2006 grande punto that timing chain snapped at 72000 miles