If you want to get the bonnet open when the catch has broken and the is no cable to get hold of the Renault Grand Espace; use the screwdriver to PUSH the catch from right to left.
make a hook out of a coat hanger. release bonnet from inside the car push hook through the slot the catch normally sits through lift bonnet and pull hook forward to release the safety catch hey presto your in lol
Release the main bonnet catch on the steering wheel column. Push the bonnet catch in the front grill once and it'll come out half way, then pull the half out catch to open the bonnet.
lol it
Volkswagen bonnet catch
The bonnet catch is in the foot well on the passenger side near the door but high up. Pull it to release the catch then put your fingers between the gap of the slightly open bonnet lid in the middle. You will find a small plate that needs to pushed up ton release the lid.
Because your bonnet's open!
To open the bonnet on a Mercedes-Benz C200, first locate the bonnet release lever inside the vehicle, usually found on the driver's side near the footwell. Pull the lever to release the initial latch. Then, move to the front of the car, slide the safety catch under the bonnet to the side, and lift the bonnet open. Ensure the bonnet is securely propped up with the support rod if applicable.
pull the bonnet catch in the car you plonker
If the bonnet catch is broken on a Fiat Punto, you can try to access the bonnet by using a flat screwdriver or a similar tool to manipulate the catch mechanism. Gently insert the screwdriver into the gap between the bonnet and the grille, and try to push or pull the latch mechanism. Alternatively, you can remove the grille or access the catch from underneath the car if necessary. If these methods don't work, consider seeking professional assistance to avoid damaging the vehicle.
pull the bonnet catch
To open the bonnet of a Mercedes-Benz ML350, first, locate the bonnet release lever inside the vehicle, usually found on the driver's side near the footwell. Pull the lever to release the bonnet latch. Next, move to the front of the vehicle, slide your hand under the bonnet, and locate the safety catch, which you need to push or lift to fully open the bonnet. Finally, lift the bonnet and secure it with the prop rod if necessary.