answersLogoWhite

0

Various ways: 1 - press the longest of the three linear buttons on the remote control and hold it for two seconds; 2 - if the car is unlocked look at floor level just inside the driver's door - there is a lever to the rear end of the door sill that you lift up (the lever at the front end opens the bonnet/hood); 3 - if you have a handbook read it for emergency opening procedures; 4 - if you're in trouble because none of these works, talk to a dealer

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you open trunk for 1999 Porsche boxster if trunk release cable is broke and key is in trunk?

dealers can do it - they have a way to get in from the engine compartment but won't share how it is done :(


Can you manually open the front trunk for a 2002 boxster?

can you manually open front trunk on a 2002 boxster?


How do you open the rear trunk of a 2002 Porsche boxster?

There are 2 buttons on the driver side door sill. The front one is for the front trunk and the back one is for the rear trunk. As long as your battery is not dead, it will open.


Where is the windshield washer canister at the Porsche boxster s 2001?

In the 2001 Porsche Boxster S, the windshield washer canister is located in the front trunk (frunk) of the vehicle. To access it, open the front trunk and look towards the driver's side. The canister is typically a translucent container that can be identified by its cap, which is often marked with a windshield wiper symbol.


How do you replace the headlight bulb on a 1999 Porsche boxster?

To replace the headlight bulb on a 1999 Porsche Boxster you will need to open the trunk and take out the screw of the spare tire compartment. Slide the entire headlight assembly out after loosening it with a hex socket wrench. Then, put a new bulb in place.


How do you open the glove compartment on a Porsche boxster?

In my 2003 Boxster S, the handle lifts up. The console pushes in.


How do you open the trunk of a Porsche boxter without a key?

To open the trunk of a Porsche Boxster without a key, you can use the emergency release mechanism located inside the cabin. This is usually accessible through the rear seats or a designated access panel. If you cannot reach it, contacting a locksmith or Porsche service center for assistance is advisable, as they can help you open the trunk without causing damage. Always ensure that you have proper ownership documentation before seeking help.


How can I open the rear trunk to a 2000 Porsche Boxster if the cable is broken and the FOB does not work?

If the cable to the rear trunk of your 2000 Porsche Boxster is broken and the FOB is unresponsive, you can try accessing the trunk through the passenger compartment. Remove the passenger seat for better access, and locate the access panel or a small opening behind the seat to reach the trunk release mechanism. If that doesn't work, you might need to remove the rear panel inside the trunk area or seek assistance from a professional locksmith or mechanic.


How do you open front trunk of Porsche Boxster 2000 when regular open thing not working I left Food in there I found the emergency release cable but i pull nothing happens help please?

set ur car on fire


How do you change Porsche boxster rear trunk strut?

To change the rear trunk strut on a Porsche Boxster, start by safely securing the trunk in an open position. Use a flat-head screwdriver to carefully pry off the retaining clips that hold the strut in place. Once the clips are removed, disconnect the old strut by pulling it away from the mounting points. Finally, attach the new strut by pushing it onto the mounting points and securing it with the clips.


How do you open the glove compartment on a 2000 Porsche boxster?

The 2000 Boxter does not have a glove box.


How do you replace a battery on a 2000 Porsche Boxster?

To replace the battery on a 2000 Porsche Boxster, first, ensure the vehicle is turned off and parked on a flat surface. Open the front trunk and locate the battery compartment under the cover. Disconnect the negative terminal first, followed by the positive terminal, and then remove the old battery. Install the new battery by connecting the positive terminal first, then the negative, and secure everything back in place before closing the trunk.