0
1)get all the remotes you want to program even the ones already programmed(you can program up to 4 remotes)
2)get inside car and close all doors
3)insert key into ignition lock
4)turn ignition on then off and remove the key from the ignition cylinder
in less than 20 sec
5)press and hold the unlock button
6)press the lock button 3 times then release both buttons (the doors should lock then unlock)
to program additional remotes repeat the steps 5 an 6 on the other remotes in the same time interval without opening any doors or turning on ignition
7)open the door or open ignition to finish the programming process
What else can I help you with?
How do you reprogram remote alarm key on my BMW?
Take it to the dealer
How do you program your car alarm remote to your car?
You can set your alarm to your car using the remote control exclusively for cars.
How do you locate alarm 2004 Chevy Venture?
the remote has been lost and a new remote has been purchased. i had to remove the fuse to get the alarm to stop. how can i reset the alarm? So i can program the new remote.
How do you program a viper alarm remote?
reprogram 98 ford expedition with viper 600 alarm
How do you program a python 488p car alarm?
488P Is the remote to a Python car alarm, need to be more specific on the alarm you have.
How do you program an alarm remote on a Ford Windstar?
Read the owners manual.
Is it alarm remote or remote alarm?
An alarm remote is a remote control for an alarm system. A remote alarm is an alarm that rings somewhere far away from whatever set off the alarm.
How do you program marksman car alarm remote?
To program a marksman car alarm remote, first, ensure the vehicle is in the "off" position. Then, insert the key into the ignition and turn it to the "on" position without starting the engine. Press and hold the program button on the alarm system until you hear a confirmation beep, then press the button on the remote you wish to program. Finally, turn the ignition off to complete the programming process.
How do you unlock alarm on 2003 BMW 5 series?
To unlock the alarm on a 2003 BMW 5 Series, use the remote key fob to press the unlock button. If the remote is unresponsive, you can manually unlock the driver's door with the key, which should deactivate the alarm. If the alarm still does not turn off, inserting the key into the ignition and turning it to the "on" position may also help. If issues persist, consult the owner's manual or seek assistance from a BMW dealer.
How do you disconnect BMW Z3 alarm?
If you are the owner you should know that if I tell you how, everybody will be able to disconnect the alarm of a z3 and your car will be vulnerable. So use the remote with the white buton.
How do you program a python 476p car alarm remote?
To program a Python 476P car alarm remote, first, ensure the vehicle is in the "off" position and the alarm system is installed correctly. Then, insert the key into the ignition and turn it to the "on" position without starting the engine. Press and hold the "program" button on the alarm system while pressing the button on the remote you wish to program. Release both buttons, and the system should confirm successful programming with a sound or indicator light. Follow any specific instructions from the user manual for additional settings or features.
How do you program alarm remote transmitter of Subaru Outback Ltd 2003?
Try this site... http://www.cars101.com/subaru/keyless.html#alpine used it to program a remote for my 2005 Outback Wagon
