How do you program key fob on 1999 jaguar xk8?

Answer 1

1. Make sure that your batteries are fresh; two are required and are sold at most drug stores. Energizer #CR2016 2. If you are replacing the batteries, take the time to clean the contact points with an alcohol swab. There are four under the rubber button cover and the battery contact makes five cleaning points
3. Get in the driver's seat and close the door.
4. Pull the headlight flasher stalk toward you and keep it in this position, the headlights will be on when you pull this stalk towards you.
5. Insert the key into the ignition and turn it to position one. Position one will not energize your dashboard
6. Release the headlight stalk and then pull it towards you four times, flashing the headlights each time; you should end this sequence with the headlight stalk in its normal released position and the headlights off
7. A beep will be heard and a small red light will show on the gear shift gate surround
8. Press the unlock button five times, each time you ought to hear a beep...count the beeps!
9. After the fifth beep programming is complete
10. Remove key, step out of car, close door and test
11. If you have more than one remote to program, alter step 8 in the following way:
2 remotes: press one remote unlock two times, the other remote unlock 3 times

3 remotes: press the first remote unlock two times, the second remote unlock two times, the last remote unlock once

4 remotes: press the first remote unlock once, the second remote unlock once, the third remote unlock once and the fourth remote unlock twice

The reason this works with multiple remotes is that the programming mode is only memorized when the unlock button is pushed a total of five times, no matter how many remotes you use.
5 remotes: press each remote just once