89 escort should have a Ford 1.9l overhead cam engine these timing belts have a tensioner/idler pulley that can be relieved using a special tool or 1/2 inch wrench/breaker bar
warning: if your timing belt broke while engine running its possible for a valve to contact a piston causing severe internal engine damage. cross your fingers!! get a haynes or chilton manual and set your camshaft to crankshaft timing
timing belt
To line up the timing belt marks for a 97 Ford Escort, the cam and crank sprockets should both be oriented with the timing mark on each sprocket in the 12 o'clock position. The tension should not be released on the belt. Once tension is applied to the belt, that should bring the cam slightly rearward to the position where it's supposed to be. Then check the timing by turning the engine clockwise for two turns.
timing belt
To change the timing belt on a 1994 Ford Aspire, first, disconnect the battery and remove the engine covers. Then, relieve tension on the serpentine belt and remove it, followed by the timing belt cover. Align the timing marks on the crankshaft and camshaft, remove the old timing belt, and install the new one, ensuring proper alignment with the timing marks. Finally, reassemble the components, tension the serpentine belt, and reconnect the battery.
Loosen the tensioner bolt, let the spring loaded tensioner contact the belt. Then tight the tensioner bolt.
This car will use a timing belt.
97 ford escort 2000 timing belt replacement
No , it's a timing BELT
The correct belt tension will be maintained by the belt tensioner. The tension is not adjustable on this car.
how do i set the timing on a 1995 ford escort LX??
The timing belt is located inside the timing belt cover at the fron of the engine.
You don't. The timing belt should have a spring loaded tensioner which pulls on the belt to adjust tension.