Very carefully lol. Before beginning any of these steps you first want to disconnect your battery so that you dont blow any fuses. on a serious note you need a 5 Star hex tool in order to remove the screws that are hidden under two small removable flaps on the left and right side of the console. Once you have the saws removed you should be able to slide the deck right out might need to put a little strength into it but not much. Once you have the head unit removed you want to disconnect the wires in the back of the unit.the antenna wire is usually the easiest wire to disconnect, but for the harness wire you have to lift a notch up in rider to remove it . Hope this helps
Not supposed to, the 318 was designed to have the 46 in or the 50 in deck on it. The 60 in decks mounting hardware that was used on the 420 is not the same. But if you can get it to work, good luck.
best way to pull an engine 318 bmw
I would not do that if I were you....
91" long, 5/8 wide
Call your local BMW dealership with that number.
upside down willy
remove the transmission pan. then remove the filter.
18% of 318= 18% * 318= 0.18 * 318= 57.24
73% of 318= 73% * 318= 0.73 * 318= 232.14
The AC blower relay can be found under the dashboard on a 318 BMW 2001 model. It is on the passenger side and access is easier if you remove the glovebox on the passenger side.
318 is a number
With a 36mm wrench and a spanner to hold the water pump pulley.