answersLogoWhite

0

Depending on the model, you have to first take two top brackerts holding rad (13mm bolts from memory) disconnect hoses, unbolt rad fan (couple of 8mm nuts, hard to get to bottom ones) if there is air con, care not to punture that rad, once done that the rad will gently lift out. It is very tight on space, and you have to be a little patient!!!

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Change a thermostat rover 400 diesel where is it located?

The thermostat is located on the front of the engine. Drain the water from the radiator. Remove the water hose. Remove the thermostat housing bolts. Reverse the process to install the new thermostat.


How do you access the fuel pump on a Rover 400?

Remove the Fuel Tank


How do you change a thermostat in a rover 400 diesel 2ltr?

To change the thermostat in a Rover 400 diesel 2.0L, first ensure the engine is cool and disconnect the battery. Drain the coolant from the radiator and remove the upper radiator hose connected to the thermostat housing. Unbolt the thermostat housing, take out the old thermostat, and clean the mating surfaces. Install the new thermostat, reassemble the housing, reconnect the hose, refill the coolant, and reconnect the battery.


How do you bleed air from radiator of a 2000 range rover?

How do you bleed air from radiator of a 2000 range rover?


How do you install a radiator 1999 Land Rover?

To install a radiator in a 1999 Land Rover, start by draining the coolant from the system and disconnecting the battery. Remove any components blocking access to the radiator, such as the fan shroud and hoses. Unscrew the mounting bolts and carefully lift the old radiator out, then place the new radiator in position and secure it with the bolts. Reconnect the hoses, fan shroud, and the battery, then refill the cooling system with coolant.


How to bleed a rover 400 with a sealed hydraulic clutch?

the easiest thing to do is remove the slave cylinder then pump the pedal and the fluid will pour out


How to remove a Corvette radiator?

Drain the water from your Corvette radiator. Remove the radiator hoses. Remove the radiator stabilizing arm bolt. Remove the radiator retaining bolts. The radiator will come off.


If your rover 400 is overheating and no heat inside is it the thermostst faulty?

check fluid level first if too low you will have air in the system and no heat check for leak or faulty radiator cap


How do you replace the radiator in a 1998 Mitsubishi eclipse?

Remove the water from the radiator. Remove the radiator hoses. Remove the stabilizing arm from the top of the radiator. Remove the radiator retaining bolts. Reverse the process to install the new radiator.


How do you remove Remove transmission on 2004 land rover discover?

how to remove the transmission on 2004 Land Rover discover


Diagram on how to install a replacement bulb on a rover 400?

You can find a diagram regarding the installation of a replacement ball, on your Range Rover 400, at most Range Rover dealerships. Most auto-parts stores will have the diagram.


How can you bleed a Rover 400 1998 hydraulic clutch?

The Hydraulic clutch fitted to the rover 400 is a sealed unit and the only thing that you can do is to replace the complete unit