0
Here are some notes I found on:
http://experts.about.com/q/Toyota-Repair-832/91-tercel-steering-wheel.htm
The ignition lock cylinder needs to be replaced, the only way the cylinder will come out is if you can get into the "acc" position, there is a release pin on the housing that you have to push in to remove the cylinder,. remove the covering around the locj to gain access to the pin, it may be a good idea to buy the new lock cylinder first so you can see where the release pin is, if you can not get the key into the ACC position the lock cylinder needs to be drilled out and I recommend having a Toyota dealer or locksmith deal with this.
What else can I help you with?
How do you replace ignition module in a 98' Malibu?
Remove the ignition module retaining ring. Pull the ignition barrel out. Remove the wiring harness from the back of the ignition barrel. Reverse the process to install the new ignition module.
How do you replace ignition key tumbler in 1999 Chevrolet lumina car?
Remove the ignition retaining ring. Pull the ignition barrel out. Remove the wiring harness from the back of the ignition barrel. Reverse the process to install the new ignition key tumbler.
How do t change a saxo ignition barrel?
To change the ignition barrel on a Saxo, first ensure the battery is disconnected for safety. Remove the steering column cover by unscrewing the screws, then insert the key and turn it to the "on" position to release the barrel. Slide out the old ignition barrel and replace it with the new one, ensuring it locks into place. Reassemble the steering column cover and reconnect the battery.
How do you replace an ignition switch for a 2000 blazer?
You will need to remove the retaining ring at the top of your 1978 Chevrolet Blazer ignition switch. Slide the ignition barrel out and remove the wiring harness. Reverse the process to install the new ignition switch.
How do you remove ignition barrel on vt?
The ignition barrel can be removed by removing the retaining ring. The barrel will slide out. Remove the wiring harness from the back of the barrel.
How do you remove fiat stilo ignition barrel?
to remove stilo ignition barrel, look underneath the barrel. there is a square button holding the barrel in. put the key in the ignition, turn 2 notches, and press the button in with a screwdriver. Then wiggle the barrel out using the key.
How do you replace the ignition barrel boot release and door locks on a Peugeot 106 zest 2?
The instructions to replace the ignition barrel boot release and door locks on a Perugeot 106 Zest 2 can be found online by doing a web search. If you have issues doing so after researching the instructions, I recommend calling a mechanic or locksmith to assist you.
How do you change the ignition barrel in your toyoto mr2?
if its the Toyota mr2 mk2, then this is easy,1, place the key in the ignition and turn to acc,2, press the small button that is sunk into the top of the barrel behind the facia,3, withdraw the barrel,hope this helps, as for any other way without the key i couldn't tell you, i have just removed mine this way and replaced it
How do you remove the ignition barrel on a 1992 VN Commodore without using the key?
you need to have the ignition barrel in the on position otherwise you cant to it.
How do you replace an ignition switch on a 2001 Monte Carlo ss 3.8?
Begin by removing the retaining ring at the top of your 2001 Chevrolet Monte Carlo ignition switch. The ignition switch barrel will slide out. Remove the wiring harness from the end of the ignition switch. Reverse the process to install your new ignition switch.
What do you do if your key breaks off in the ignition?
In some cases you can use a magnet to pull out the broken key. You might be able to pull the broken key out with a needle nose pliers. You might need to replace the ignition barrel.
How many hours to fit ignition barrel in x type jag?
how long will it take to fit ignition barrel in x type jag
