To remove the back seat in an Astra MK4 Convertible, start by locating and removing the bolts or screws securing the seat base, which are typically found at the front or underneath the seat. Once these are removed, lift the front of the seat base and pull it forward to detach it from the rear brackets. For the backrest, unbolt any fasteners at the bottom and pull it upward to release it from its mounts. Always refer to the vehicle's manual for specific instructions related to your model.
To remove the rear seat back from a 2006 Toyota Solara convertible, first, fold down the rear seat bottom if necessary to access the seat back bolts. Then, locate and remove the bolts or screws securing the rear seat back to the vehicle's frame, usually found at the bottom or sides. After the fasteners are removed, gently pull the seat back away from the vehicle to detach it. Be cautious of any wiring or clips that may be connected to the seat back.
To remove the rear seat back in a 1992 Chrysler LeBaron Convertible, first, locate the retaining bolts at the bottom of the seat back; these are usually accessible from the trunk. Use a socket wrench to remove the bolts. Once the bolts are removed, gently pull the seat back upward and away from the seat base to detach it. Be cautious of any clips or connectors that may also need to be released.
It is between the rear seat back and the trunk. You have to remove the rear seat to access.
To remove the rear seat from a Toyota Solara convertible, first, locate the seat release mechanisms, typically found at the base of the seat or on the sides. Pull or press the release levers to detach the seat bottom. For the seat back, check for bolts or clips securing it to the frame, which may require a wrench or screwdriver to remove. Once unfastened, carefully lift the seat back out of the vehicle.
To remove the back seat of a 1989 Chrysler LeBaron convertible, first, locate and remove the seat bottom by pulling up on the front edge to release it from the clips. Next, for the seat back, look for bolts or screws at the base or sides that secure it; remove these using the appropriate tool. Once detached, gently lift the seat back upwards to release it from any remaining clips or hooks. Be sure to check for any seatbelt attachments that may need to be disconnected before completely removing the seat.
remove back up tire in back right behind seat
To remove the rear seat in a 1993 Chrysler LeBaron convertible, start by locating the seat cushion release clips or bolts at the front of the seat. Pull or unscrew these fasteners to detach the seat cushion, then lift it out. Next, access the rear seat back by locating the bolts or clips securing it to the vehicle frame, usually found at the bottom or sides. Remove these fasteners, and then gently pull the seat back away from the body to fully detach it.
To remove the back seat from a 2005 Megane convertible, start by locating the release mechanisms or bolts securing the seat. Typically, you may need to pull the seat base up or forward to expose the fasteners. Once the bolts or clips are removed, you can lift the seat cushion out. Finally, if the backrest is separate, check for any additional fasteners or clips at the top and pull it out gently.
dunno if any diff for convertible, but, CLK class rear seats have clips in back corners, supposed to be released by pushing back on front of seat corner, then lift up. do same for each corner
Any convertible with a back seat.
Behind the back seat
you have to remove the rear seat than the seat belt bracket and than the seat back after that you have to remove the rear panels whwre the speakers are after all that is off there are three bolts 13mm I believe loosen them close your top and tighten bolts with top latched.