you cant top it up. you have to buy a genuine Renault clutch hydrolics kit.don't mistake this with a clutch kit tho. it is a big job to put it in. the whole dash has to be taken out of the car. my 2000 expression has had a clutch kit fitted and the reservoir is behind the steering column. you do have to take the trim off around the steering wheel.
You need to rent or buy a fan clutch removal tool kit. you need to remove the fan and clutch as one before you can separate the fan from the clutch.
you must first remove the engine then separate the transmission, you can easily remove the bearing then, but since you have access to the clutch, change the clutch and pressure plate at the same time. you can get a total after market kit for about $120.
You can buy a especific kit for your Clio. Go to the k&n site and search for your car. There is also information in pictures, how to fit the kit in your engine. I have tried it on my 1997 1.2 Clio.
1. Buy a New clutch and pressure plate 2. Remove gearbox 3. remove old clutch and pressure plate 4. fit new clutch and pressure plate 5. fit gearbox 6. Drive
One needs a clutch kit once he or she notices that the clutch is slipping. It is better to change it than be stuck in the middle of the road with a faulty clutch.
you will need to remove either the engine or the transmission(engine is easiest in the 94 escorts) replace the clutch and put the engine back in
You need a new end clutch kit. Go to http://www.importperformancetransmissions.com, select your transmission type (auto or manual) and purchase the "IPT End Clutch Kit" under the "Overhaul Parts" section. To install, remove the front passenger wheel and the wheel well cover. Locate end clutch, remove, and reverse removal process for installing the new one.
Purchase a clutch rebuild kit, and a clutch puller tool.
Can u teach me how to change a clutch kit for a 96 kawasaki Volkin??
Changing the clutch on these cars isn't really easy. you have to remove all connection and wires going to transaxle. disconnect steering knuckle and half axles. remove the lower suspension support bar. then undo the bolts holding the transmission to the engie and lower out the transmission. then remove clutch off the engine and replace. You can get a clutch kit for a 1990 celica for rough 130 dollars at autozone.
u cant just add a turbo to any engine, you'd have to buy an engine that has a turbo as standard, normal enigines are strong enough to take a turbo useless u spend big £££ on it