http://www.bmwdiy.info/non-celis-front/index.html
To remove the headlight cover on a BMW Z3, first, open the hood and locate the screws securing the cover. Use a screwdriver to carefully remove these screws. Once the screws are out, gently pull the cover away from the headlight assembly, being cautious not to damage any clips or wiring. If necessary, consult your owner's manual for specific details related to your model year.
If you want to remove the BMW headlight lens simply follow the user manual.
To change the headlight bulb on a BMW 740i, first, turn off the ignition and open the hood. Locate the headlight assembly and remove the cover by twisting it counterclockwise. Carefully disconnect the wiring harness from the old bulb, then remove the bulb by twisting it out. Insert the new bulb, reconnect the wiring, and replace the cover, ensuring it's securely fastened before closing the hood.
To replace the angel eye bulb on a 2006 BMW 325i, start by opening the hood and locating the headlight assembly. Remove the headlight cover by unscrewing or unclipping it, depending on the design. Carefully disconnect the old bulb from its socket, then insert the new angel eye bulb, ensuring it's secure. Finally, reassemble the headlight cover and test the lights to ensure they are functioning properly.
I think the lens cover has snaps along the top and sides of the lens cover. It also looks as if you would have to loosen the turn signal unit that sits beside each headlight. The headlight lens cover is tucked into a recess along the turn signal unit. It doesn't look as if you would need any tools to remove the old lens covers, but you may need a screwdriver to loosen or remove the turn signal unit next to the lens.
You have to remove the grill (entire piece that extends under both headlights), remove the headlight housing and then pop the headlight off the connectors.
To remove the headlights from a 2003 BMW Z4, first, open the hood and locate the two bolts securing each headlight assembly. Remove these bolts using a socket wrench. Next, carefully pull the headlight assembly forward while disconnecting the wiring harness and any clips. Once free, the headlight can be removed completely from the vehicle.
You don't remove the cover. Open your hood and look behind the headlight housing. The bulb will twist out of the socket. Install your new one and twist back in. make sure you don't touch the new bulb with your fingers because the oils on your skin will cause the bulb to wear out prematurely. Hope that helps!
Remove the cover in the trunk. Should be right there.
To replace the headlight assembly on a 2004 BMW Z4, first, disconnect the battery to ensure safety. Remove the front bumper by unscrewing the necessary bolts and clips to gain access to the headlight. Disconnect the wiring harness from the old headlight assembly, then unbolt it and carefully remove it from the vehicle. Install the new headlight assembly by reversing the steps, ensuring all connections are secure before reassembling the bumper and reconnecting the battery.
To replace the headlight bulb on a BMW Z3, first, ensure the car is turned off and the keys are removed. Open the hood and locate the headlight assembly; for easier access, you may need to remove the cover or the entire headlight unit. Disconnect the electrical connector from the old bulb, twist the bulb socket counterclockwise to release it, and replace it with a new bulb, ensuring not to touch the glass with your fingers. Finally, reassemble any parts you removed and test the new bulb before closing the hood.
BMW E39 Scheinwurfer' means BMW E39 headlight or headlamp. It is the make and model of a headlight that is used in certain BMW models. It can be bought from any BMW dealership.