You don't remove the cover. Open your hood and look behind the headlight housing. The bulb will twist out of the socket. Install your new one and twist back in. make sure you don't touch the new bulb with your fingers because the oils on your skin will cause the bulb to wear out prematurely. Hope that helps!
Open Hood. Remove the cover from the headlight by prying up the keeper. Remove the metric 13 nuts holding the headlight in. Take out headlight and replace the bulb. Reinstall the headlight and reinstall headlight and cover.
All you will need to change the bulb is a screwdriver and a new bulb. Remove the headlight cover using the screwdriver and remove the burnt out bulb. Once out, you can insert a new bulb into the slot and replace the headlight cover.
You have to remove the entire headlight assembly. Glass cover clips on with plastic clips. Remove and install CAREFULLY as glass breaks easily.
What do you mean by headlight cover?What are you trying to do?JW
Changing a headlight bulb in a 2007 Buick Lacrosse can be done easily. Just remove the cover piece and change the bulb.
Headlight cover? The headlight can be removed by first removing the bumper cover. THen all the bolt that attach the headlight to the vehicle will be exposed. The "cover" is glued to the headlight housing.
To change the high beam headlight on a 2008 Honda Goldwing you first have to remove the headlight housing by taking the six bolts off. After you remove the cover it is as simple as disconnecting the wiring and then pulling the light out.
Are you entirely sure there _is_ a headlight cover?
most times you dont have to.. try to access it from the engine side of the light
To change the headlight on a 1994 Polaris Super Sport, first, remove the headlight cover by unscrewing the screws or releasing the clips holding it in place. Disconnect the wiring harness from the back of the headlight bulb, then remove the old bulb by turning it counterclockwise. Insert the new bulb, ensuring it is properly seated, reconnect the wiring harness, and reattach the headlight cover. Finally, test the new headlight to ensure it is functioning properly.
Use the button on the dash to raise the headlights, remove the black plastic cover from around the headlight, unbolt the cover from the frame mechanism (IIRC).
YOU NEED T TAKE OUT TRIM ON TOP OF RADIATOR AND HAVE LONG FINGERS TO REMOVE OR U CAMN TAKE BUMPER COVER OF AND REMOVE HEADLIGHT TO GET IT