To remove the wing mirror indicator cover on a Skoda Octavia 2, first, carefully pry off the cover using a flat-head screwdriver or a trim removal tool, taking care not to damage the surrounding paint or plastic. Once the cover is loose, disconnect the wiring harness attached to the LED. Replace the old LED with a new one, reconnect the harness, and then snap the cover back into place securely.
doorknop
hi thereprise the mirror glass out and remove the outer casing and also remove the backing, there are 2 small screws at the bottom of the mirror remove them and replace the lens, dont worrie about which way you connect the mirror glass electrics as it is a curcuit,good luck
To remove the mirror from a repeater indicator, locate the clips or screws that hold the mirror in place and carefully remove them. Once the clips or screws are undone, gently pull the mirror out of the indicator housing. Be sure to handle the mirror with care to avoid damaging it during removal.
To change the wing mirror indicator light on a Skoda, first, ensure the vehicle is parked and the ignition is off. Carefully remove the mirror cover by prying it off with a flat tool, being cautious not to damage the clips. Once the cover is off, disconnect the wiring harness and remove the old indicator bulb. Replace it with a new bulb, reconnect the wiring, and reattach the mirror cover securely.
To replace the bulb in the side mirror indicator of a Subaru Outback, first, ensure the vehicle is off and safely parked. Gently pry off the mirror cover using a trim tool or flathead screwdriver to avoid damage. Locate the bulb socket, twist it counterclockwise to remove, then replace the old bulb with a new one, ensuring it's securely in place. Finally, reattach the mirror cover and test the indicator to ensure it's functioning correctly.
To change the mirror indicator on a Citroën Relay, first, ensure the vehicle is turned off and disconnect the battery for safety. Remove the mirror cover by gently prying it off with a flat tool, taking care not to damage the clips. Once the cover is off, disconnect the old indicator bulb or LED by twisting or pulling it out, and replace it with a new one. Finally, reassemble the mirror cover and reconnect the battery.
remove wing mirror
Remove the inside door panel. Remove the wiring harness from the mirror. Remove the mirror retaining bolts. Reverse the process to install the new mirror.
The indicator bulb on the VW Beetle wing mirror is an LED which means the unit must be replaced. You need to remove the mirror glass to access the LED.
http://golfgtiguides.co.uk/guides/remove-mk5-wing-mirror-and-change-indicator/ see the above site...
To replace the driver's side mirror on the 2003 GMC Envoy, first remove the interior door panel. Then, remove the mirror connection cover inside the panel as well. Unscrew the screws holding the mirror to the door. Remove the wiring and replace the mirror with a new mirror. Replace the screws and place the door panel back onto the door.
Remove outer case there is two screws holding the unit in place one behind the mirror and one to the end behind the indicator plug you will need a long thin hex driver i think t 1.5 size there around 35 pounds new