remove interior light by using a flat tool or knif then remove white backing plate by genitally pressing two lugs together then remove bottom of aerial base this is metal then unscrew base
To fix a new aerial to a Peugeot 205, first, remove the old aerial by unscrewing it from the base and disconnecting any wiring. Then, insert the new aerial into the mounting hole and secure it in place with the provided nut or screw, ensuring a tight fit to prevent water ingress. Reconnect any wiring if applicable and test the aerial by tuning in to a radio station to ensure proper reception. Finally, check for any leaks around the base to ensure it's properly sealed.
To change a non-powered aerial on a Toyota Land Cruiser, first, remove the base cover by unscrewing any visible screws or gently prying it off. Disconnect the aerial cable from the radio unit and unscrew the aerial from the mounting point on the vehicle. Replace it with the new aerial by reversing the process: screw it into place, reconnect the cable, and reattach the base cover securely. Ensure everything is tightened properly to avoid issues with reception.
To change the electric aerial on a Mitsubishi Shogun, first, ensure the vehicle is turned off and disconnect the battery to avoid any electrical issues. Remove the interior trim panel surrounding the aerial to access the mounting screws. Disconnect the wiring harness and unscrew the aerial from its base, then replace it with the new aerial by reversing the steps. Finally, reconnect the battery and test the new aerial to ensure it functions properly.
Easy... Remove the courtesy light and you will see the base of aerial. It has a metal cover over the mounting nut, so using a mole-wrench or similar grab hold of the cover and simply pull it straight down. Undo the nut that's underneath the cover, pull off the aerial cable and then you can then remove the aerial base.
To replace the aerial on a Suzuki Grand Vitara, first, ensure the vehicle is turned off and disconnect the negative battery terminal. Remove the old aerial by unscrewing it from its base, which may require a wrench or pliers. Install the new aerial by screwing it into the base, ensuring it is secure. Finally, reconnect the battery terminal and test the new aerial for proper functionality.
To replace the aerial on a VW Polo, first, ensure the vehicle is turned off and the radio is disconnected. Carefully remove the old aerial by unscrewing it from the base, which may require a special tool or a simple wrench, depending on the model. Once removed, install the new aerial by screwing it into the base securely, and reconnect the radio. Finally, test the reception to ensure the new aerial is functioning properly.
To change the aerial on a Citroën C3 Pluriel, first, remove the plastic cover around the base of the aerial by gently prying it off. Unscrew the aerial from its base, which may require a wrench or pliers depending on how tightly it is secured. Replace it with the new aerial by screwing it into the base and reattach the plastic cover. Ensure everything is snug and secure to prevent water leakage.
To remove a roof aerial from a transit, first disconnect the vehicle's battery to ensure safety. Then, locate the mounting base of the aerial, which may be secured with screws or bolts. Use a screwdriver or socket wrench to remove these fasteners, and gently pull the aerial away from the roof. Finally, if necessary, seal any exposed holes with a weatherproof material to prevent leaks.
To remove the aerial from the roof of a Vauxhall Astra, start by gently prying off any decorative cover or cap that may be concealing the base of the aerial. Next, use a suitable tool, like a wrench or socket, to unscrew the aerial from its mounting. Once it's loose, carefully pull it out of the roof socket. Finally, check for any wiring and disconnect it if necessary before fully removing the aerial.
To replace the aerial (antenna) on a 2001 Mercedes-Benz CLK320, first, ensure the vehicle is off and disconnect the battery for safety. Remove the interior trim panel from the area around the aerial, usually located near the rear window or roof. Unscrew the old aerial from its base, disconnect the wiring, and then attach the new aerial by reversing the process—connecting the wiring, securing it in place, and reassembling the trim. Finally, reconnect the battery and test the new aerial for proper function.
To change the aerial on a 1992 EB Falcon, first, ensure the vehicle is turned off and remove the radio fuse to avoid any electrical issues. Access the aerial by unscrewing it from its base, typically located on the front fender or roof. Disconnect the electrical connector and any retaining clips, then replace it with the new aerial by reversing the removal process. Once installed, reconnect the electrical connector and replace the radio fuse before testing the new aerial for functionality.
To replace the aerial (antenna) on a Ford Fiesta, first, locate the aerial base on the roof or rear of the vehicle. Remove any screws or clips holding it in place, then gently pull it out. Install the new aerial by reversing the process—attach it securely and ensure any seals are intact to prevent water leaks. Finally, test the radio to confirm proper function.