Been looking for info on this.
Got bored waiting and got stuck in (1997 model).
Get two screw drivers, stick one in between the clock and the dash at the top and another at the bottom.
Lever the clock unit out gently.
Unplug the clock unit connector at the back of the clock.
On the side of the clock unit is a screw, which is the back of the bulb.
Give it a quarter turn to release it (don't give it more than that, as the plastic will have become quite brittle over time and will crumble if you give it more).
The bulb can then be pulled out (pliers or gentle screw driver work to lever it out).
Insert new bulb and refit the clock.
Hope that helps.
As the climate change bulbs
To change the headlight bulb on a Peugeot 406 estate, first, open the hood and locate the headlight assembly. Depending on the side, you may need to remove the plastic cover or the battery for easier access. Twist the bulb socket counterclockwise to detach it, then pull out the old bulb and replace it with a new one, making sure not to touch the glass. Finally, reassemble everything by reversing the steps and test the new bulb.
To replace the rear door bulbs on a Peugeot 406 Estate, first, open the rear door and locate the light assembly. Carefully remove the cover or lens by either unclipping or unscrewing it. Once exposed, twist the bulb holder counterclockwise to remove it, then pull out the old bulb and replace it with a new one. Finally, reassemble the light assembly and ensure it’s securely attached before closing the door.
replace high/low beam switch
To set the clock in a Peugeot 406, turn the ignition on without starting the engine. Press the "Menu" button on the dashboard until you see the clock display. Use the arrow buttons to adjust the hours and minutes, then confirm your settings. Finally, press the "Menu" button again to exit the setting mode.
Access is gained through interior light fitment.
WHERE THE HOM ON THE peugeot 406 2.0hdi out sade
were will i get information for 1996 peugeot 406 petrol
yes you can im putting a 2.0 8v turbo from a 406 in a 405. wat you wanting to put in?
you should be able to get a thin screwdriver and remove covers at each side of display and there will be 4 screws, remove these pull display forward and remove bulb & holder, you can iether replace the bulb or you can pick up a bulb & new holder ( recommended )
How do you change the ignition coil on a peugeot 406 coupe?
To change the sidelight on a Peugeot 406, first, open the hood and locate the back of the headlight assembly. Carefully twist and remove the bulb holder from the assembly, then pull out the old sidelight bulb. Insert the new bulb into the holder, ensuring it's secure, and reattach the holder back into the headlight assembly. Finally, test the sidelight to ensure it’s functioning properly.