To replace the rear seat latch on a Peugeot 307, first, remove the rear seat cushion by lifting it upward to release it from its clips. Next, locate the latch mechanism, which may require removing any surrounding trim or covers. Disconnect the old latch by unscrewing it and unplugging any wiring, then install the new latch by reversing the process. Finally, reattach the seat cushion and ensure everything is securely in place.
TNT
If you are wanting to fold up the seat for more cargo space the handle on my 96 Geo Tracker is on the rear center floor latch. You get to it from the rear door.
Rear seat cable latch system broken and does not work. Seat does not pull forward to allow access to the 3rd row.
beneath the rear seat Regards
you cant
To remove the seat on a Yamaha 350 Big Bear, locate the seat release mechanism, which is typically a latch or bolts at the rear of the seat. For models with bolts, use a wrench to unscrew them. For latch mechanisms, pull the latch up or slide it to release the seat. Once the latch or bolts are disengaged, lift the seat off the frame to remove it.
Push in on the bottom and then raise it up. There is a latch on each side. Stick your finger in and push up.
remove the seat to access screws
To remove the seat from a Yamaha snowmobile, first locate the seat latch mechanism underneath the rear of the seat. Depending on the model, you may need to use a key or simply lift the latch to release the seat. Once the latch is disengaged, lift the rear of the seat upwards and then slide it towards the rear of the snowmobile to fully remove it. Remember to disconnect any wiring harness or cables attached to the seat before completely removing it.
No. The lower LATCH anchor points are contained in the lower rear seat assembly both left and right. The rear seats in 1997-2001 CRV's do not contain any suitable mount points for lower LATCH restraint anchors.
Remove rear seat and panel underneath seat. How do I remove rear seat?!?!