1. Remove the plastic cowling by liftin on the front edge nearest the windshield.
2. Unplug all the switched and plugs from the back of the instrument cluster.
3. Remove the four screws securing the instruments to the dashboard.
4. Lift up the instrument cluster and unplug he speedometer cable and flat white pin connector on the passenger side of the cluster.
5. Lift the instrument cluster off.
To install, simply reverse the directions.
when that happens you usually just have to replace the instrument cluster when that happens you usually just have to replace the instrument cluster when that happens you usually just have to replace the instrument cluster
Replace resistors on Instrument cluster circuit board. $1.00 @ Radioshack and about an hour of your time...
You have to replace the entire instrument cluster.
If the VSS is defective replace the instrument cluster.
What kind of car?? 1999 grand am
Inside the instrument cluster. To replace them remove the cluster and take it apart.
You take out the cluster and replace the bulbs in the back of the cluster. Very simple job, takes baout 10 mins!
this is a 2008. help please.
If the VSS is defective replace the instrument cluster.
Remove the instrument cluster then replace the bulbs. = =
Behind the instrument Cluster. Or remove it and replace the Cluster.
You will need to remove the instrument cluster board. To do that, remove the trim piece around the instrument cluster, then carefully pull the instrument cluster out of the dashboard. Note that the instrument cluster plugs in to a socket in the dashboard, so be careful as you remove the circuit board so that you do not damage the plug. Once the instrument cluster is out, replace all bulbs. They twist to remove, and if the odometer bulb has failed, the others are getting old too. It might be best to replace them all to avoid future problems.