To replace the oxygen sensor on a 1999 Mercedes SLK230, first, ensure the engine is cool and disconnect the negative battery terminal. Locate the oxygen sensor, typically found on the exhaust manifold or downstream in the exhaust system. Use a wrench or oxygen sensor socket to unscrew the old sensor and carefully install the new one, ensuring it's securely tightened. Finally, reconnect the battery and check for any error codes using an OBD-II scanner.
unplug the connector, remove the oxygen sensor, it is located under the vehicle at the catalytic converter. install new oxygen sensor, plug in connector. done.
Code usually means there is a bad mass air sensor. Replace sensor and code resets. Make sure the car has clean air filter and filter box is also clean.
Often the MAF sensor needs replacing, or possibly the coil packs, leads, spark plugs, K40 relay board (re-solder or replace), oil contaminated wiring, O2 sensor or crank angle sensor, disintegrated vacuum hoses, loose hoses, other.
To replace the oxygen sensor on a Honda Odyssey, first unscrew the sensor. Then use a 22 mm socket or 7/8 inch wrench to replace the oxygen sensor.
replace transmission speed sensor for a E350 mercedes benz
To replace the oxygen sensor disconnect the oxygen sensor electrical connector. Use an oxygen sensor socket to remove the sensor. spray the sensor with penetration oil if it is difficult to loosen. install in reverse.
An Oxygen sensor does not reset. You have to replace them and yes they are expensive.
You bring it to a service station and tell them to replace the oxygen sensor.
how do you replace oxygen sensor of 2001 bmw 318 ci es
the oxygen sensor on your vehilcle will cost about 140.00 you can order the part from carpartsdiscount.com they carry a great deal of hard to find parts for our cars. note: WITH THE RIGHT TOOLS YOU CAN INSTALL IT YOURSELF.
How to locate and clean or replace mass air flow in Mercedes ml320
You can not successfully clean an oxygen sensor. You need to replace it.