Inside the trunk on the right and left sides, there are two pull down doors in the carpet liner. Simply pull the tab down to reveal the back of the turn signal, reverse and brake light assembly. In the center there are tabs that when squeezed and pulled straight back, release the assembly and allow access to all 3 bulbs. Changing them is just a matter of pressing the bulb in gently and turning it counter-clockwise. Replace everything in reverse order and you're done.
how do i replace the front strut on 1999 Saab 9-3
how do you replace an alternator on an 1999 Saab 9-3
if your brake fluid is low, you probably need to replace your brake pads. If your pads are good and you fluid is low, you have a leak somewhere. By replacing your pads, the brake fluid level will rise to the proper level. If you add fluid now, then replace your pads, brake fluid will leak out the top of your fluid reservoir and most likely eat the paint off what ever it spills on. Brake fluid and car paint DO NOT MIX.
How do you replace a front indicator bulb in a Saab 93
How do you replace a key battery on a 2004 Saab 93
From SAAB., Your nearest dealer can get a key to match your barrel.
remove spring clip of the front 7mm Allen key socket for sliders BUT a special tool is required a rear brake piston wind back tool with saab/vauxhall attachment a easy job with the right tool clockwise rotation
Head gasket repair for a 1999 Saab 9-5 3.0l.
R134a
To replace the front shocks on a 1997 Saab 900 S, first, safely lift and support the vehicle. Remove the front wheel, then detach the brake caliper and support it to avoid stressing the brake line. Next, unbolt the top shock mount under the hood and the lower shock bolt on the control arm. Replace the old shock with the new one, reattach all components in reverse order, and ensure everything is properly torqued before lowering the vehicle.
Saab dealer quoted 1 hour to replace the serpentine belt. The cost of the belt was $60 canadian.
To replace the fog light bulb on a 2007 Saab 9-3, first, ensure the vehicle is turned off and the keys are removed. Access the fog light assembly by turning the steering wheel to the left or right to gain better access, then locate the fog light housing. Twist the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reinsert the socket by turning it clockwise. Finally, test the fog light to ensure it’s functioning properly.