try your public library buy a haynes manual 15.00 bucks
Same answer as: "How do you replace a starter on a 92 Geo Prism LSI or GSI?" at this same site.
The average cost to replace a transmission for a Geo Prism will vary depending on the cost of labor and the year of the Prism. On average, it will cost between $3,500 to $4,000 dollars.
From under the car.
Raise and support vehicle Remove wheel Re-install 2 lug nuts to hold rotor in place Remove caliper mounting bolts Slide caliper off rotor Use a "C" clamp to fully compress piston into caliper body Replace inner and outer brake pads RE-install caliper PUMP BRAKE PEDAL TO SET PADS AGAINST ROTOR PRIOR TO MOVING VEHICLE
To tighten the emergency brake cable on a 1990 Geo Prism, start by depressing the brake pedal. Next, locate the parking brake equalizer bar. Rotate both rear tires to feel the brake shoes slightly drag against the brake drum.
Look at how to replace one on a 93 model.
i dont really know
To change the brakes on a 1992 Geo Metro, start by lifting the car with a jack and securing it with jack stands. Remove the wheel and locate the brake caliper; unbolt and remove it, then take out the old brake pads. Replace them with new pads, reattach the caliper, and ensure it's secure. Finally, repeat for the other side, and remember to pump the brake pedal before driving to ensure proper brake function.
Yes, the front brakes on a 1996 Geo Metro are equipped with disc brakes, not drum brakes. While there isn't a traditional adjustment for the front brakes like there is for drum brakes, you can check and adjust the brake pads and calipers for proper alignment and wear. It's important to regularly inspect the brake system and replace pads as needed to ensure optimal braking performance.
You gotta get under the car and do it from the back of the engine.
How do you replace power steering pressure hose on a 1993 geo prizm