Are you talking about the side marker bulbs on the front bumper? These bulbs should have a access panel from behind them. Look in front of the tire, on the front part of the platic wheel well liner. Should be a small hole that has a release tab, press that tab to release the side marker lens. Then you can just pull the old bulb out, and re-install.
I need to replace the odometer light on 1998 Mercedes ML 320.
To replace the fog light on a 1998 Mercedes-Benz E320, first, ensure the vehicle is turned off and the keys are removed. Access the fog light by removing the cover or the entire fog light assembly from the bumper, usually held in place by screws or clips. Disconnect the wiring harness from the old fog light, replace it with the new bulb, reconnect the wiring, and reassemble the cover or fog light assembly. Finally, test the new fog light to ensure it’s functioning properly.
the bumper will have to be removed.
The lens is only available as the whole fog lamp. You have to remove the bumper to replace it.
very carefully lol
The 1998 Volvo front bumper is held in place with eight retaining bolts. Remove the retaining bolts and the front bumper will come off. Reverse the process to install your new front bumper.
how to replace standing lamp in 1998 e320
To remove the front bumper cover on a 1998 Mercedes-Benz ML320, start by disconnecting the battery for safety. Next, remove any screws or bolts securing the bumper, which are typically located in the wheel wells and underneath the front of the vehicle. Carefully pull the bumper away from the body, ensuring to disconnect any electrical connectors for fog lights or sensors. Finally, lift the bumper off and set it aside.
Open the hood and then turn on the head lights. When the light opens you be able to reach in and twist the bulb out. You will certainly loose some skin off your hand when you do it!
Doesn't have em
drop the bumper and take the headlight housing out
how do you replace shift gear light on a 1998 le altima car?