answersLogoWhite

0

See this video on YouTube.

http://www.youtube.com/watch?v=LXoBRKQeT44

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Can the front control arm bushings of a 2001 Kia Sephia be replaced without a press?

No


How do you replace upper control arm bushings on 2001 Chevy Express 3500 van?

To replace the upper control arm bushings on a 2001 Chevy Express 3500 van, first, lift the front of the vehicle and secure it on jack stands. Remove the wheel, then unbolt the upper control arm from the frame and the ball joint from the spindle. Use a bushing press or a suitable tool to remove the old bushings and install the new ones. Reassemble by reversing the disassembly steps, ensuring all bolts are torqued to the manufacturer's specifications.


How do you adjust camber on a 2001 ford ranger?

its the upper control arm bolts also called cam's. most of the time you have to replace the cam bolts and the bushings. that's the best idea for you to idea. rangers are pretty well known for junking those upper control arm bushings.


When to change 2001 Ford F-150 control are bushings?

On my truck during a routine brake job. The truck was on the rack. At 99,999 miles, all the bushings of the front end had disintegrated. This is a2001 Lariat F 150 Extended cab.


What causes a 2001 Dodge Caravan front end clunk?

Sway bar bushings


Oldsmobile silhouette 2001 traction control comes on when turning?

Check your control arms. Bushings could be bad.


How do you replace front brakes on 2001 Hyundai accent?

How do you replace front breaks on 2001 Hyundai acce t


How do you repair door hinge on 2001 Sunfire?

Most problems with an automobile door hinge is worn out bushings. There is a small rubber bushing behind the adjustment bolts. Replace the bushings.


What causes a 2001 ford windstar to sqeak in the front suspension when turned to the left?

If it is a short squeek, then the suspension bushings are probably worn. These are small rubber gromets that most repair shops can replace easily and inexpensively.


Can the front lower control arm bushings be replaced in a 2005 Dodge Neon without replacing the control arms?

Yes, but be aware that if you are not a ASE certified mechanic or have one that you trust...I wouldn't do it. Of course you can go out and buy the bushings, which is cheaper, but unless you have a good mechanic...I wouldn't recommend it. Iam doing the same thing right now with my 2001 neon. And I just bought the whole control arms. Cause the control arms consists of the bushings and the ball joints. So its good just to replace the whole thing. But if your looking for the cheaper option, then that's one to go with. But as I said, be aware that the bushings can be destroyed when trying to install the new ones, if your not careful. Good Luck! (Note: If your wanting to know the price of a whole control arm...its $99 at autozone or you can buy some refurbed control arms for about $65. each.)


How do you replace front axle on 2001 Buick Lesabre?

Replace axle on 2001 buick Lesabre


Do you need to replace the control arm and sway bar if your ball joint goes bad on a 2001 Nissan Altima?

okay, there is no replacement ball joint on these models you must replace the whole control arm it is not much more to buy. At Napa you can buy a control arm for 80.00 dollars. This is much easy to do than pressing a ball joint and you get new bushings as well.