answersLogoWhite

0

Use a flathead screwdriver to firmly push the front of the marker cover toward the tire or rear of the car while gently lifting up the marker cover. The marker cover should pop out, however, if it is the first time you have replaced the marker light, the cover will be a little tough to remove. BE CAREFUL not to use too much force because you can risk cracking the cover or chipping the car paint (my bad experience). When you pop the cover off, just twist the bulb holder counter clockwise to get to the bulb. Replace bulb and bulb holder, then pop the cover back in to place.

Thanks, I used a sharpened chop stick so it didn't scratch the paint.

I used the stated above techniques on a 2001 E320, and it works better than what the owner's manual shows. Best answer to a common question. Thanks.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you replace marker light bulb 2001 Mercedes Benz C320?

How do you replace 2001 Mercedes c320 front marker light


How do you replace a front marker light bulb on a Mercedes S430?

how do you replace standing light bulb in the s430


How do you replace the side marker bulb on a 2001 Mitsubishi Montero Sport?

I took a few screws out of the front wheel well mud guard behind the marker light and reached in through there to remove and replace the side marker light.


How do you replace the front side marker light on 2004 Honda pilot?

Take it to the garage


How to change front side marker bulb on Mercedes SLK-350?

To change the front side marker bulb on a Mercedes SLK-350, first, open the hood and locate the marker light assembly. Carefully remove the assembly by twisting it counterclockwise or releasing any clips. Pull out the old bulb and replace it with a new one, ensuring it is securely fitted. Finally, reinsert the assembly back into its place and twist it to secure it before closing the hood.


How do you replace the side marker light bulb on a 2002 Mazda Millenia?

You have to pull off the front bumper 1st. Then after you pull off the front bumper, then you have to disconnect the whole light from the car. After that you can replace the bulb.


How so you replace passenger side front marker light blub in 2001 Lincoln LS?

The passenger side front marker light can be access from the back of the light. Take hold of the connector, push in and turn at the same time. The light will come out. Reverse the process to install the new light.


How do you replace the side marker bulb in a 2005 Mercedes C230?

its easy just put a liitle of preasure on marker light push forward . it should come out. do the reverse to put back on after replacing bulb.


How do you replace side marker light Xterra?

On my 2002 Nissan Xterra I had to remove 4 screws from the front bumper and wheel well and then I was able to get to the back side of the side marker light and remove the nut in order to get to the light bulb.


How do you replace bumper light bulb 1998 Mercedes Benz E320?

Are you talking about the side marker bulbs on the front bumper? These bulbs should have a access panel from behind them. Look in front of the tire, on the front part of the platic wheel well liner. Should be a small hole that has a release tab, press that tab to release the side marker lens. Then you can just pull the old bulb out, and re-install.


How do you replace the front left marker light on a 2002 mercedes benz S500?

Take a Flat screwdriver or Trim tool and carefully push lense toward the back of the vehicle and pull outwards. Rear of lense springs back. #194 Bulb.


How do you replace a marker light on the right front for a 1998 Isuzu trooper?

To replace the right front marker light on a 1998 Isuzu Trooper, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the marker light assembly; then, remove the screws or clips holding the assembly in place. Carefully pull the assembly out, disconnect the wiring harness, and replace the old bulb with a new one. Reconnect the wiring, secure the assembly back in place, and test the new light to ensure it works.