To replace the radiator expansion tank on a 2004 Land Rover Discovery, first ensure the engine is cool, then remove the radiator cap to relieve pressure. Disconnect the hoses attached to the expansion tank and unscrew any mounting bolts securing it in place. Replace it with the new tank, reattach the hoses, and secure it with the bolts. Finally, refill the cooling system with the appropriate coolant and check for leaks.
Yes, you can add coolant directly to the radiator of a Land Rover Discovery, but it's generally recommended to fill it through the expansion tank if possible. This helps ensure proper mixing and circulation of the coolant. Always check the vehicle's manual for specific guidelines on coolant types and levels. Make sure the engine is cool before opening the radiator cap to avoid burns.
The fuel filter on a Land Rover Discovery 3 is located in the engine compartment behind the radiator. It is accessed only from underneath the vehicle.
I want to know where the thermo switch of land rover discovery 1996 located in the car.
It schould be on the passenger side of the vehicle, right behind the radiator in a plastic egg shaped thing, in line with the radiator hose.
On a 2000 Land Rover Discovery, the radiator drain is typically located at the bottom of the radiator on the driver's side. It is a small petcock or drain valve that can be opened to allow coolant to flow out for draining or servicing. You may need to access it from underneath the vehicle, so ensure it's safely lifted and supported if needed. Always make sure the engine is cool before attempting to drain the radiator.
Take it so a Auto Glass store and they will do it.
"http://wiki.answers.com/Q/How_to_replace_a_2002_land_rover_discovery_crank_shaft_sensor"
Throw a hammer at it and buy a ford sucka!!!!!!!!!!!!!!
Land Rover Discovery was created in 1989.
It is located in a radiator hose, on a Petrol this is on the left side of the fan when looking at the engine.
To remove the radiator fan from a Land Rover Discovery, first disconnect the battery and allow the engine to cool. Remove any shrouds or covers that may obstruct access to the fan. Disconnect the electrical connector from the fan and then unbolt or unclip the fan from the radiator or housing, depending on the specific model. Carefully lift the fan out, taking care not to damage any surrounding components.
Why is Land Rover Discovery so noisy