how do you replace rear door lock assembly on 92 pONTIAC tRANSPORT
replace the door or buy a new car.
Access in rear door panel, allows you to lock/inlock rear door.
The lock actuator is in the rear door, the panel will need to be removed. When the panel is removed you will see the actuator bolted to the door frame. Not to hard to replace.
it is located under the rear seat on the right side
Take the door panel off then unscew the three torx screws on the side of the door then unhook the two linkage arms from the lock actuator.
how to replace a blown bulb behine my 99 quest speedometer
On the inside upper frame of the rear passanger door when open there are 5 bronze pegs that make contact with the door when closed, if these become dirty the electrical contact will not lock the rear door. Take fine grade sandpaper or steelwhool and shine them up, close the door and try it again.
how to replace rear view mirror on a mercedes c-300 2009
my discovery 3 rear door lock will not lock with remote
To repair a 1992 Volvo 240 rear door lock, start by removing the interior door panel to access the locking mechanism. Check for broken components or misaligned rods and replace any faulty parts as needed. Lubricate the lock mechanism with a suitable graphite or silicone lubricant to ensure smooth operation. Finally, reassemble the door panel and test the lock to confirm it functions properly.
Under engine compartment hood on driver side at rear. There should be a locater schematic showing which fuse controls door locks. Then replace if replace if metal burned through in middle of fuse. If not, sometimes corrosion is the problem. Remove, and lightly clean or abraid and reconnect.