answersLogoWhite

0

if you check in the boot there is a clip directly behind the light unscrew that then check the other side of the light for the other clip (its behind the slatted panel on the side of your boot) then it should just pull out and unplug

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you change glow plugs on a peugeot 407?

To change the glow plugs on a Peugeot 407, first disconnect the battery to ensure safety. Then, remove the engine cover if applicable, and carefully detach the wiring harness from the glow plugs. Using a socket wrench, unscrew the old glow plugs and replace them with new ones, taking care not to overtighten. Reconnect the wiring harness, replace the engine cover, and reconnect the battery to complete the process.


Why would my 3rd brake light only partially light up?

more then one light bulb in it open and replace the burn ones.


How do you remove the faulty tire pressure sensor light?

u take them out and replace with real ones!!


What are of the Peugeot 806 models?

Actually there are several different models of the Peugeot 806. The petrol ones are: Peugeot 806 2.0 (here we have two different ones: first one was built from 1994 - 1998 and second one was built from 1998 - 2002) , Peugeot 806 2.0 16V, Peugeot 806 2.0 Turbo (here we have two different ones: first one was built from 1994 - 1998 and second one was built from 1998 - 2002) and finally the Peugeot 806 1.8.


What companies make cars in France?

Peugeot, Citroen and Renault are the main ones.


How do you replace stop light 1992 Volvo 940?

Which one, the middle one or one of the two outside ones and is it the whole lamp or just the bulb you want to replace?


How do you change back light bulbs in heater controls on peugeot 306?

To change the backlight bulbs in the heater controls of a Peugeot 306, first, remove the surrounding trim panel carefully to access the controls. Disconnect the control unit from the dashboard and locate the bulb holders on the back of the unit. Twist and remove the old bulbs, then replace them with new ones, ensuring they are properly seated. Reassemble the control unit and trim panel, and test the lights to confirm they work.


Should you replace filament light bulbs with energy saving bulbs?

Yes, on an attritional basis, as the old ones burn out-


How do you replace fog light lens on a Toyota Highlander?

Trying to replace the fog lamp lens on a toyota highlander 2005, Having trouble figuring out how to remove the defective ones.


Why is the Car battery warning light on for a Peugeot 106?

Your alternator is probably faulty. This means your battery will not be getting recharged properly when driving. I had this for about a wwek and then found my battery was practically dead. I had to get a new alternator (non Peugeot ones on ebay are around £80) They are not too difficult to fit yourself , depend on you model.


How do you replace the back up light socket for 2002 gmc envoy?

simply cut the two wires then splice the new ones on


Why do the headlights on my Peugeot 206 GTi come on when using right hand indicator?

more than likely there is a problem with the light stalk. see if you can borrow one to plug in and check as the later ones are very expensive.