simply cut the two wires then splice the new ones on
You can replace the dome light bulb in a 2002 Chevy Cavalier by first prying the dome light cover off of the light. Then, remove the bulb and replace it by twisting the bulb from the socket.
Yes.
Visit our enthusiasts forum at www.trailvoy.com Lots of help for your Envoy!
The license plate light bulb on a 2002 Pontiac Grand Prix is replaced by removing the retaining bolts and pulling the bulb out of its socket. A new bulb is then put into the socket and reassembled.
To replace the center brake light in a 2002 Ford Thunderbird, first, open the trunk and locate the plastic cover over the brake light assembly. Remove the cover by unscrewing any screws or unclipping it. Next, twist the bulb socket counterclockwise to release it, then pull out the old bulb and replace it with a new one. Reassemble the socket, replace the cover, and test the brake light to ensure it works properly.
For the bulb - Open the Hood, locate the connection wire and turn and remove the socket from the back, pull the bulb and replace with new and insert into socket hole in back of light. Very easy thing to do!
open trunk look directly under light grab socket twist left and pull
To replace the brake light bulb in a 2002 Lexus SC430, first, open the trunk and remove the trunk liner or access panel to reach the rear light assembly. Next, twist the bulb socket counterclockwise to detach it from the assembly and remove the old bulb. Insert the new bulb into the socket, ensuring it's secure, then reattach the socket to the assembly by twisting it clockwise. Finally, replace the trunk liner or access panel to complete the process.
To replace the fog light on your 2002 Pathfinder all you do is pop off the black plastic piece that is right beside it. Using a 10mm wrench or socket, remove the screws. Take the whole casing out and twist the bulb out, and replace.
remove the 2 t15 screws in the taillight remove the assy. turn bulb socket out and replace
i have a 1998 trooper and i had to get a robe #2 screw driver and take off the outer housing of the socket and replace bulb and replace outer housing, be sure you put on gasketcorrectly or water will get into it.
Remove the black plastic right beside the fog light using a flathead screw driver or something of the sort. Using a 10mm wrench or socket, remove the screws. Twist light bulb out and replace.