To replace a brake light in a 2002 Lexus SC430, first, open the trunk and locate the tail light assembly. Remove the screws or clips securing the assembly, then gently pull it out to access the bulb sockets. Twist the socket counterclockwise to remove it, replace the burnt-out bulb with a new one, and reassemble the tail light by reversing the steps. Finally, test the new brake light to ensure it’s functioning properly.
Follow the link below, labeled "How to replace a Lexus IS300 tail light"
you dont you get a new car
Lexus IS300 3rd brake light is changed from the back seat. Pry the light up and disconnect wiring. Replace bulb and put back together. Easy job
y
remove bulb from in side the boot
The brake light assembly can be access through the cargo compartment. Remove the cover to the brake light assembly. Take hold of the brake light connector, push in and turn at the same time. The brake light will come out. Reverse the process to install the new brake light.
You can access the brake light bald through the trunk compartment. Remove the trunk liner from the tail light assembly. Push the brake light connector in and turn at the same time. The brake lightbulb will come out. Reverse the process to install the new brake light
To replace the rear brake light switch on a Lexus RX 300, first, disconnect the negative battery terminal to ensure safety. Then, locate the brake light switch, which is typically found above the brake pedal. Remove the wiring harness connected to the switch, unscrew it from its mounting, and replace it with the new switch. Finally, reconnect the wiring harness, reattach the battery terminal, and test the brake lights to ensure proper functioning.
To replace a brake light on a 2003 Lexus SC 430, first, open the trunk and locate the tail light assembly. Remove the plastic cover by twisting the retaining clips, then pull out the light bulb socket by turning it counterclockwise. Replace the old bulb with a new one, ensuring it's securely in place, then reassemble the socket and cover. Finally, test the brake light to ensure it’s functioning properly.
The center brake light bulbs can be replaced by lifting up on the rear light assembly and pulling towards the front of the car. www.lextechautomotivellc.com
To replace the lower hatch brake light on a 2002 Lexus RX 300, first, open the rear hatch and locate the plastic cover over the light assembly. Remove the cover by gently prying it off with a flathead screwdriver. Once exposed, twist the light socket counterclockwise to remove it, replace the old bulb with a new one, and then reassemble by reversing the steps. Ensure everything is securely in place and test the brake light to confirm it works.